This is the latest recevied telemetry packets stored in our database for station/object OK2ZAW-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1758389829 | 2.57 VDC DS -3.25 RS -90 | 0 | 0 | 0 | 0 |
| 1758388937 | 2.62 VDC DS -3.25 RS -90 | 0 | 0 | 0 | 0 |
| 1758388018 | 2.69 VDC DS -3.25 RS -90 | 0 | 0 | 0 | 0 |
| 1758387117 | 2.75 VDC DS -3.25 RS -90 | 0 | 0 | 0 | 0 |
| 1758386181 | 2.79 VDC DS -3.25 RS -90 | 0 | 0 | 0 | 0 |
| 1758384380 | 2.86 VDC DS -3.25 RS -90 | 0 | 0 | 0 | 0 |
| 1758383480 | 2.88 VDC DS -3.25 RS -90 | 0 | 0 | 0 | 0 |
| 1758382579 | 2.91 VDC DS -3.25 RS -90 | 0 | 0 | 0 | 0 |
| 1758381679 | 2.93 VDC DS -3.25 RS -90 | 0 | 0 | 0 | 0 |
| 1758380778 | 2.94 VDC DS -3.25 RS -90 | 0 | 0 | 0 | 0 |
| 1758379878 | 2.93 VDC DS -3.25 RS -90 | 0 | 0 | 0 | 0 |
| 1758378977 | 2.96 VDC DS -3.25 RS -90 | 0 | 0 | 0 | 0 |
| 1758378076 | 2.89 VDC DS -3.25 RS -90 | 0 | 0 | 0 | 0 |
| 1758377176 | 2.85 VDC DS -3.25 RS -90 | 0 | 0 | 0 | 0 |
| 1758376275 | 2.83 VDC DS -3.25 RS -90 | 0 | 0 | 0 | 0 |
| 1758375375 | 2.84 VDC DS -3.25 RS -90 | 0 | 0 | 0 | 0 |
| 1758374475 | 2.86 VDC DS -3.25 RS -90 | 0 | 0 | 0 | 0 |
| 1758373575 | 2.88 VDC DS -3.25 RS -90 | 0 | 0 | 0 | 0 |
| 1758372675 | 2.9 VDC DS -3.25 RS -90 | 0 | 0 | 0 | 0 |
| 1758371774 | 2.86 VDC DS -3.25 RS -90 | 0 | 0 | 0 | 0 |
| 1758370873 | 2.84 VDC DS -3.25 RS -90 | 0 | 0 | 0 | 0 |
| 1758369973 | 2.85 VDC DS -3.25 RS -90 | 0 | 0 | 0 | 0 |
| 1758369072 | 2.83 VDC DS -3.25 RS -90 | 0 | 0 | 0 | 0 |
| 1758368171 | 2.86 VDC DS -3.25 RS -90 | 0 | 0 | 0 | 0 |
| 1758367263 | 2.8 VDC DS -3.25 RS -90 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)