This is the latest recevied telemetry packets stored in our database for station/object GW3ATZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1779487466 | 393 Count | 681 Count | 296 Count | 4.21 VDC | 0.14 VDC |
| 1779485658 | 384 Count | 669 Count | 289 Count | 4.26 VDC | 0.14 VDC |
| 1779483850 | 376 Count | 654 Count | 283 Count | 4.23 VDC | 0.14 VDC |
| 1779482140 | 368 Count | 642 Count | 277 Count | 4.2 VDC | 0.14 VDC |
| 1779480332 | 360 Count | 630 Count | 271 Count | 4.21 VDC | 0.14 VDC |
| 1779478523 | 352 Count | 619 Count | 265 Count | 4.22 VDC | 0.14 VDC |
| 1779476715 | 344 Count | 609 Count | 259 Count | 4.21 VDC | 0.14 VDC |
| 1779474907 | 336 Count | 596 Count | 253 Count | 4.23 VDC | 0.14 VDC |
| 1779473098 | 328 Count | 583 Count | 247 Count | 4.25 VDC | 0.14 VDC |
| 1779471290 | 320 Count | 569 Count | 241 Count | 4.26 VDC | 0.14 VDC |
| 1779469482 | 302 Count | 545 Count | 225 Count | 4.22 VDC | 0.14 VDC |
| 1779467674 | 294 Count | 532 Count | 219 Count | 4.22 VDC | 0.14 VDC |
| 1779465866 | 285 Count | 515 Count | 212 Count | 4.24 VDC | 0.14 VDC |
| 1779464057 | 277 Count | 505 Count | 206 Count | 4.24 VDC | 0.14 VDC |
| 1779462249 | 269 Count | 489 Count | 200 Count | 4.2 VDC | 0.14 VDC |
| 1779455117 | 239 Count | 431 Count | 178 Count | 4.25 VDC | 0.14 VDC |
| 1779451502 | 226 Count | 412 Count | 169 Count | 4.22 VDC | 0.14 VDC |
| 1779449693 | 219 Count | 400 Count | 164 Count | 4.23 VDC | 0.14 VDC |
| 1779444268 | 196 Count | 360 Count | 147 Count | 4.23 VDC | 0.14 VDC |
| 1779438937 | 177 Count | 326 Count | 134 Count | 4.2 VDC | 0.16 VDC |
| 1779437129 | 169 Count | 316 Count | 128 Count | 4.21 VDC | 0.14 VDC |
| 1779435321 | 161 Count | 308 Count | 122 Count | 4.22 VDC | 0.16 VDC |
| 1779433513 | 153 Count | 298 Count | 116 Count | 4.22 VDC | 0.16 VDC |
| 1779431705 | 145 Count | 285 Count | 110 Count | 4.21 VDC | 0.16 VDC |
| 1779429896 | 137 Count | 273 Count | 104 Count | 4.26 VDC | 0.16 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)