This is the latest recevied telemetry packets stored in our database for station/object IW1QAF-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxPkt* | TxPkt* | Batt* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1754210378 | 23 Pkt/10m | 12 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1754209174 | 34 Pkt/10m | 19 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1754207970 | 38 Pkt/10m | 30 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1754206766 | 29 Pkt/10m | 19 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1754205562 | 37 Pkt/10m | 23 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1754204359 | 42 Pkt/10m | 33 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1754203156 | 64 Pkt/10m | 56 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1754201953 | 47 Pkt/10m | 36 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1754200747 | 60 Pkt/10m | 47 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1754199543 | 31 Pkt/10m | 20 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1754198341 | 55 Pkt/10m | 43 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1754197135 | 19 Pkt/10m | 9 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1754196310 | 35 Pkt/10m | 14 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1754195089 | 33 Pkt/10m | 13 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1754193858 | 40 Pkt/10m | 16 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1754192654 | 40 Pkt/10m | 25 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1754191420 | 40 Pkt/10m | 26 Pkt/10m | 4.92 Volt | 0 | 0 |
| 1754190218 | 38 Pkt/10m | 21 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1754189015 | 48 Pkt/10m | 41 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1754187811 | 51 Pkt/10m | 27 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1754186586 | 46 Pkt/10m | 31 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1754185382 | 32 Pkt/10m | 18 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1754184178 | 30 Pkt/10m | 12 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1754181760 | 29 Pkt/10m | 16 Pkt/10m | 4.9 Volt | 0 | 0 |
| 1754180556 | 26 Pkt/10m | 12 Pkt/10m | 4.9 Volt | 0 | 0 |
*Used Equation Coefficients:
RxPkt: 0, 1, 0
TxPkt: 0, 1, 0
Batt: 0, 0.0196, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)