This is the latest recevied telemetry packets stored in our database for station/object N7UV-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Atm_Press* | Value5* |
|---|---|---|---|---|---|
| 1775484555 | 4.19 VDC | 29.8 C | 25.8 % | 1014.88 hPa | 0 |
| 1775484405 | 4.19 VDC | 30.1 C | 25.36 % | 1016.25 hPa | 0 |
| 1775484099 | 4.19 VDC | 30.3 C | 24.97 % | 1015 hPa | 0 |
| 1775483408 | 4.19 VDC | 30.1 C | 24.01 % | 1015 hPa | 0 |
| 1775482748 | 4.19 VDC | 30.9 C | 21.21 % | 1014.5 hPa | 0 |
| 1775477940 | 4.19 VDC | 31.9 C | 18.68 % | 1016.25 hPa | 0 |
| 1775468930 | 4.19 VDC | 33.9 C | 17.73 % | 1012.88 hPa | 0 |
| 1775459920 | 4.19 VDC | 35.8 C | 16.97 % | 1015.25 hPa | 0 |
| 1775450910 | 4.19 VDC | 38 C | 16.91 % | 1011.38 hPa | 0 |
| 1775441900 | 4.19 VDC | 39.4 C | 16.64 % | 1014.25 hPa | 0 |
| 1775439989 | 4.21 VDC | 40.5 C | 16.85 % | 1013.75 hPa | 0 |
| 1775439305 | 4.17 VDC | 41.1 C | 15.04 % | 1013.13 hPa | 0 |
| 1775439012 | 4.17 VDC | 42 C | 14.72 % | 1012.38 hPa | 0 |
| 1775438790 | 4.17 VDC | 42.8 C | 14.75 % | 1013 hPa | 0 |
| 1775438276 | 4.17 VDC | 44.5 C | 14.13 % | 1011.75 hPa | 0 |
| 1775434767 | 4.17 VDC | 45.7 C | 14.7 % | 1015.5 hPa | 0 |
| 1775425753 | 4.17 VDC | 42 C | 15.74 % | 1012.75 hPa | 0 |
| 1775416743 | 4.17 VDC | 35.5 C | 16.74 % | 1017.13 hPa | 0 |
| 1775407733 | 4.17 VDC | 32.1 C | 17.22 % | 1018.25 hPa | 0 |
| 1775402263 | 4.17 VDC | 32.7 C | 17.4 % | 1017.38 hPa | 0 |
| 1775402103 | 4.17 VDC | 32.6 C | 17.96 % | 1016.75 hPa | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)