This is the latest recevied telemetry packets stored in our database for station/object CE1RLP-30. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1754177041 | 4.49 VDC | 12.9 VDC | 0 | 0 | 0 |
1754176140 | 4.49 VDC | 12.88 VDC | 0 | 0 | 0 |
1754175239 | 4.53 VDC | 12.86 VDC | 0 | 0 | 0 |
1754174322 | 4.51 VDC | 12.98 VDC | 0 | 0 | 0 |
1754173453 | 4.5 VDC | 13.04 VDC | 0 | 0 | 0 |
1754172552 | 4.54 VDC | 12.92 VDC | 0 | 0 | 0 |
1754171652 | 4.51 VDC | 12.9 VDC | 0 | 0 | 0 |
1754170751 | 4.55 VDC | 12.98 VDC | 0 | 0 | 0 |
1754169850 | 4.56 VDC | 12.98 VDC | 0 | 0 | 0 |
1754168950 | 4.53 VDC | 13 VDC | 0 | 0 | 0 |
1754168049 | 4.53 VDC | 13.18 VDC | 0 | 0 | 0 |
1754167148 | 4.48 VDC | 12.94 VDC | 0 | 0 | 0 |
1754166248 | 4.49 VDC | 12.84 VDC | 0 | 0 | 0 |
1754165347 | 4.55 VDC | 12.8 VDC | 0 | 0 | 0 |
1754164447 | 4.53 VDC | 13.18 VDC | 0 | 0 | 0 |
1754163546 | 4.55 VDC | 13 VDC | 0 | 0 | 0 |
1754162645 | 4.51 VDC | 12.9 VDC | 0 | 0 | 0 |
1754161744 | 4.52 VDC | 13.02 VDC | 0 | 0 | 0 |
1754160844 | 4.47 VDC | 12.86 VDC | 0 | 0 | 0 |
1754159943 | 4.52 VDC | 12.8 VDC | 0 | 0 | 0 |
1754159042 | 4.48 VDC | 12.86 VDC | 0 | 0 | 0 |
1754158142 | 4.55 VDC | 13.06 VDC | 0 | 0 | 0 |
1754157241 | 4.49 VDC | 12.76 VDC | 0 | 0 | 0 |
1754156340 | 4.55 VDC | 12.92 VDC | 0 | 0 | 0 |
1754155440 | 4.5 VDC | 12.98 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)