This is the latest recevied telemetry packets stored in our database for station/object KJ6BXN-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1771618763 | 3.6 VDC | 0 | 0 | 0 | 0 |
| 1771617863 | 3.59 VDC | 0 | 0 | 0 | 0 |
| 1771616963 | 3.59 VDC | 0 | 0 | 0 | 0 |
| 1771616062 | 3.55 VDC | 0 | 0 | 0 | 0 |
| 1771615162 | 3.56 VDC | 0 | 0 | 0 | 0 |
| 1771614262 | 3.55 VDC | 0 | 0 | 0 | 0 |
| 1771613362 | 3.54 VDC | 0 | 0 | 0 | 0 |
| 1771612462 | 3.54 VDC | 0 | 0 | 0 | 0 |
| 1771611561 | 3.53 VDC | 0 | 0 | 0 | 0 |
| 1771610661 | 3.52 VDC | 0 | 0 | 0 | 0 |
| 1771609761 | 3.51 VDC | 0 | 0 | 0 | 0 |
| 1771608861 | 3.51 VDC | 0 | 0 | 0 | 0 |
| 1771607961 | 3.51 VDC | 0 | 0 | 0 | 0 |
| 1771607060 | 3.49 VDC | 0 | 0 | 0 | 0 |
| 1771606160 | 3.5 VDC | 0 | 0 | 0 | 0 |
| 1771605260 | 3.5 VDC | 0 | 0 | 0 | 0 |
| 1771604360 | 3.49 VDC | 0 | 0 | 0 | 0 |
| 1771603460 | 3.49 VDC | 0 | 0 | 0 | 0 |
| 1771602559 | 3.49 VDC | 0 | 0 | 0 | 0 |
| 1771601659 | 3.49 VDC | 0 | 0 | 0 | 0 |
| 1771600759 | 3.49 VDC | 0 | 0 | 0 | 0 |
| 1771599859 | 3.48 VDC | 0 | 0 | 0 | 0 |
| 1771598959 | 3.47 VDC | 0 | 0 | 0 | 0 |
| 1771598058 | 3.48 VDC | 0 | 0 | 0 | 0 |
| 1771597158 | 3.48 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)