This is the latest recevied telemetry packets stored in our database for station/object F5ODP-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1779374763 | 152 Count | 0 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1779371155 | 111 Count | 0 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1779367547 | 75 Count | 0 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1779363939 | 22 Count | 0 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1779360329 | 999 Count | 0 Count | 0 Count | 4.19 VDC | 0 VDC |
| 1779356720 | 961 Count | 0 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1779353112 | 753 Count | 0 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1779349707 | 588 Count | 0 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1779346097 | 549 Count | 0 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1779342488 | 513 Count | 0 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1779338879 | 476 Count | 0 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1779335268 | 441 Count | 0 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1779331660 | 405 Count | 0 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1779328050 | 371 Count | 0 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1779324441 | 335 Count | 0 Count | 0 Count | 4.21 VDC | 0 VDC |
| 1779320833 | 301 Count | 0 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1779317225 | 264 Count | 0 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1779313640 | 222 Count | 0 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1779310009 | 190 Count | 0 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1779306401 | 153 Count | 0 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1779302793 | 115 Count | 0 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1779299185 | 76 Count | 0 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1779295577 | 38 Count | 0 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1779291969 | 1002 Count | 0 Count | 0 Count | 4.16 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)