EA2RCF LoRa APRS MAP Backup

My position About Go to MAIN map Powered by EA2RCF Radioclub Foronda ☰

reset

SP2RO-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP2RO-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*
1775500864	0 Count	52 Count	0 Count	1.97 VDC
1775499963	95 Count	1008 Count	69 Count	1.93 VDC
1775499062	94 Count	980 Count	69 Count	1.93 VDC
1775498161	93 Count	942 Count	69 Count	1.9 VDC
1775497261	92 Count	908 Count	69 Count	1.91 VDC
1775496360	91 Count	873 Count	69 Count	1.94 VDC
1775495459	90 Count	843 Count	69 Count	2.01 VDC
1775494558	89 Count	803 Count	69 Count	1.91 VDC
1775493657	88 Count	777 Count	69 Count	1.95 VDC
1775492757	87 Count	746 Count	69 Count	2.04 VDC
1775491856	86 Count	715 Count	69 Count	2.14 VDC
1775490955	85 Count	684 Count	69 Count	1.97 VDC
1775490054	82 Count	657 Count	67 Count	2.15 VDC
1775489153	69 Count	607 Count	55 Count	2.1 VDC
1775488252	33 Count	498 Count	20 Count	2.26 VDC
1775487351	18 Count	415 Count	6 Count	2.06 VDC
1775486451	11 Count	376 Count	0 Count	2.29 VDC
1775485550	10 Count	341 Count	0 Count	2.29 VDC
1775484648	9 Count	313 Count	0 Count	2.23 VDC
1775483748	8 Count	278 Count	0 Count	2.12 VDC
1775482847	7 Count	246 Count	0 Count	2.21 VDC
1775481946	6 Count	215 Count	0 Count	2.1 VDC
1775481045	5 Count	186 Count	0 Count	2.07 VDC
1775480144	4 Count	151 Count	0 Count	2.16 VDC
1775479244	3 Count	123 Count	0 Count	1.98 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)