This is the latest recevied telemetry packets stored in our database for station/object SP2HCA-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791454243 | 63 Count | 1036 Count | 45 Count | 4.01 VDC | 0.08 VDC |
| 1791452742 | 61 Count | 1000 Count | 44 Count | 4.01 VDC | 0.08 VDC |
| 1791451241 | 59 Count | 957 Count | 43 Count | 4 VDC | 0.08 VDC |
| 1791449739 | 58 Count | 912 Count | 43 Count | 4 VDC | 0.08 VDC |
| 1791448237 | 56 Count | 875 Count | 42 Count | 4 VDC | 0.08 VDC |
| 1791446736 | 54 Count | 838 Count | 41 Count | 4 VDC | 0.08 VDC |
| 1791445235 | 52 Count | 799 Count | 40 Count | 3.99 VDC | 0.08 VDC |
| 1791442232 | 47 Count | 676 Count | 37 Count | 3.99 VDC | 0.08 VDC |
| 1791440730 | 46 Count | 593 Count | 37 Count | 3.99 VDC | 0.08 VDC |
| 1791439229 | 41 Count | 483 Count | 33 Count | 3.98 VDC | 0.08 VDC |
| 1791437728 | 29 Count | 384 Count | 23 Count | 3.98 VDC | 0.08 VDC |
| 1791437148 | 24 Count | 319 Count | 22 Count | 3.98 VDC | 0.08 VDC |
| 1791435646 | 16 Count | 169 Count | 15 Count | 3.98 VDC | 0.08 VDC |
| 1791434145 | 6 Count | 77 Count | 6 Count | 3.98 VDC | 0.08 VDC |
| 1791432644 | 91 Count | 1029 Count | 72 Count | 3.98 VDC | 0.08 VDC |
| 1791431142 | 83 Count | 959 Count | 65 Count | 3.98 VDC | 0.08 VDC |
| 1791429641 | 77 Count | 892 Count | 60 Count | 3.98 VDC | 0.08 VDC |
| 1791428138 | 68 Count | 818 Count | 52 Count | 3.98 VDC | 0.08 VDC |
| 1791426637 | 62 Count | 754 Count | 47 Count | 3.98 VDC | 0.08 VDC |
| 1791425136 | 57 Count | 700 Count | 43 Count | 3.98 VDC | 0.08 VDC |
| 1791423634 | 53 Count | 643 Count | 40 Count | 3.99 VDC | 0.08 VDC |
| 1791422133 | 47 Count | 570 Count | 35 Count | 3.98 VDC | 0.08 VDC |
| 1791420631 | 39 Count | 500 Count | 28 Count | 3.99 VDC | 0.08 VDC |
| 1791419129 | 35 Count | 417 Count | 25 Count | 3.98 VDC | 0.08 VDC |
| 1791417628 | 30 Count | 352 Count | 21 Count | 3.98 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)