This is the latest recevied telemetry packets stored in our database for station/object SP8C-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765801948 | 167 Count | 184 Count | 167 Count | 0 VDC | 0 VDC |
| 1765800147 | 167 Count | 184 Count | 167 Count | 0 VDC | 0 VDC |
| 1765798347 | 167 Count | 184 Count | 167 Count | 0 VDC | 0 VDC |
| 1765796547 | 167 Count | 184 Count | 167 Count | 0 VDC | 0 VDC |
| 1765794747 | 167 Count | 184 Count | 167 Count | 0 VDC | 0 VDC |
| 1765792946 | 167 Count | 184 Count | 167 Count | 0 VDC | 0 VDC |
| 1765791146 | 167 Count | 184 Count | 167 Count | 0 VDC | 0 VDC |
| 1765789346 | 167 Count | 184 Count | 167 Count | 0 VDC | 0 VDC |
| 1765787545 | 167 Count | 184 Count | 167 Count | 0 VDC | 0 VDC |
| 1765785745 | 167 Count | 183 Count | 167 Count | 0 VDC | 0 VDC |
| 1765783945 | 167 Count | 182 Count | 167 Count | 0 VDC | 0 VDC |
| 1765782144 | 167 Count | 181 Count | 167 Count | 0 VDC | 0 VDC |
| 1765780351 | 167 Count | 181 Count | 167 Count | 0 VDC | 0 VDC |
| 1765778551 | 154 Count | 167 Count | 154 Count | 0 VDC | 0 VDC |
| 1765776751 | 154 Count | 167 Count | 154 Count | 0 VDC | 0 VDC |
| 1765774950 | 154 Count | 166 Count | 154 Count | 0 VDC | 0 VDC |
| 1765773150 | 154 Count | 165 Count | 154 Count | 0 VDC | 0 VDC |
| 1765771350 | 154 Count | 164 Count | 154 Count | 0 VDC | 0 VDC |
| 1765769550 | 154 Count | 163 Count | 154 Count | 0 VDC | 0 VDC |
| 1765767749 | 154 Count | 163 Count | 154 Count | 0 VDC | 0 VDC |
| 1765765949 | 154 Count | 163 Count | 154 Count | 0 VDC | 0 VDC |
| 1765764149 | 154 Count | 162 Count | 154 Count | 0 VDC | 0 VDC |
| 1765762349 | 154 Count | 161 Count | 154 Count | 0 VDC | 0 VDC |
| 1765760548 | 154 Count | 159 Count | 154 Count | 0 VDC | 0 VDC |
| 1765758748 | 154 Count | 158 Count | 154 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)