This is the latest recevied telemetry packets stored in our database for station/object IQ2CY-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxPkt* | TxPkt* | Batt* | Volt Aux* | Ampere Aux* |
|---|---|---|---|---|---|
| 1762832594 | 16 Pkt/10m | 0 Pkt/10m | 4.04 Volt | 0.5 Volt | -1.27 Ampere |
| 1762831990 | 15 Pkt/10m | 0 Pkt/10m | 3.98 Volt | 0.5 Volt | -1.27 Ampere |
| 1762831385 | 14 Pkt/10m | 0 Pkt/10m | 3.98 Volt | 0.5 Volt | -1.27 Ampere |
| 1762830782 | 18 Pkt/10m | 0 Pkt/10m | 3.96 Volt | 0.5 Volt | -1.27 Ampere |
| 1762830178 | 16 Pkt/10m | 0 Pkt/10m | 3.94 Volt | 0.5 Volt | -1.27 Ampere |
| 1762829573 | 22 Pkt/10m | 0 Pkt/10m | 3.98 Volt | 0.6 Volt | -1.27 Ampere |
| 1762828970 | 17 Pkt/10m | 0 Pkt/10m | 3.98 Volt | 0.5 Volt | -1.27 Ampere |
| 1762828367 | 23 Pkt/10m | 0 Pkt/10m | 3.94 Volt | 0.5 Volt | -1.27 Ampere |
| 1762827763 | 16 Pkt/10m | 0 Pkt/10m | 3.94 Volt | 0.5 Volt | -1.27 Ampere |
| 1762827160 | 20 Pkt/10m | 0 Pkt/10m | 3.96 Volt | 0.5 Volt | -1.27 Ampere |
| 1762826556 | 17 Pkt/10m | 0 Pkt/10m | 3.98 Volt | 0.6 Volt | -1.27 Ampere |
| 1762825952 | 18 Pkt/10m | 0 Pkt/10m | 4.04 Volt | 0.5 Volt | -1.27 Ampere |
| 1762825347 | 16 Pkt/10m | 0 Pkt/10m | 4.02 Volt | 0.5 Volt | -1.27 Ampere |
| 1762824743 | 18 Pkt/10m | 0 Pkt/10m | 4.04 Volt | 0.5 Volt | -1.27 Ampere |
| 1762824140 | 16 Pkt/10m | 0 Pkt/10m | 4.06 Volt | 0.5 Volt | -1.27 Ampere |
| 1762823536 | 16 Pkt/10m | 0 Pkt/10m | 4.04 Volt | 0.5 Volt | -1.27 Ampere |
| 1762822932 | 16 Pkt/10m | 0 Pkt/10m | 4.02 Volt | 0.5 Volt | -1.27 Ampere |
| 1762822328 | 16 Pkt/10m | 0 Pkt/10m | 4.06 Volt | 0.5 Volt | -1.27 Ampere |
| 1762821724 | 11 Pkt/10m | 0 Pkt/10m | 4 Volt | 0.5 Volt | -1.27 Ampere |
| 1762821296 | 17 Pkt/10m | 0 Pkt/10m | 4.08 Volt | 0.5 Volt | -1.27 Ampere |
| 1762820692 | 18 Pkt/10m | 0 Pkt/10m | 4.02 Volt | 0.5 Volt | -1.27 Ampere |
| 1762820087 | 21 Pkt/10m | 0 Pkt/10m | 3.96 Volt | 0.5 Volt | -1.27 Ampere |
| 1762819483 | 20 Pkt/10m | 0 Pkt/10m | 4 Volt | 0.5 Volt | -1.27 Ampere |
| 1762818879 | 18 Pkt/10m | 0 Pkt/10m | 4.02 Volt | 0.5 Volt | -1.27 Ampere |
| 1762818275 | 16 Pkt/10m | 0 Pkt/10m | 4.06 Volt | 0.5 Volt | -1.27 Ampere |
*Used Equation Coefficients:
RxPkt: 0, 1, 0
TxPkt: 0, 1, 0
Batt: 0, 0.0196, 0
Volt Aux: 0, 0.1, 0
Ampere Aux: 0, 0.01, -1.27
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)