EA2RCF LoRa APRS MAP Backup

My position About Go to MAIN map Powered by EA2RCF Radioclub Foronda ☰

reset

OZ1MAS-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OZ1MAS-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*
1750168677	336 Count	80 Count	80 Count
1750167773	335 Count	80 Count	80 Count
1750166868	334 Count	80 Count	80 Count
1750165964	333 Count	80 Count	80 Count
1750165163	332 Count	80 Count	80 Count
1750164258	331 Count	80 Count	80 Count
1750163354	330 Count	80 Count	80 Count
1750162449	329 Count	80 Count	80 Count
1750161545	328 Count	80 Count	80 Count
1750160641	327 Count	80 Count	80 Count
1750159736	326 Count	80 Count	80 Count
1750143563	308 Count	80 Count	80 Count
1750142658	307 Count	80 Count	80 Count
1750141754	306 Count	80 Count	80 Count
1750140850	305 Count	80 Count	80 Count
1750139945	304 Count	80 Count	80 Count
1750139041	303 Count	80 Count	80 Count
1750138136	302 Count	80 Count	80 Count
1750137232	301 Count	80 Count	80 Count
1750136328	300 Count	80 Count	80 Count
1750135423	299 Count	80 Count	80 Count
1750134519	298 Count	80 Count	80 Count
1750133614	297 Count	80 Count	80 Count
1750132710	296 Count	80 Count	80 Count
1750131805	295 Count	80 Count	80 Count

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)