This is the latest recevied telemetry packets stored in our database for station/object 3Z2T-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Bat* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795359428 | 4.04 VDC | 0 VDC | 0 | 0 | 0 |
| 1795358527 | 4.03 VDC | 0 VDC | 0 | 0 | 0 |
| 1795357626 | 4.02 VDC | 0 VDC | 0 | 0 | 0 |
| 1795356725 | 4 VDC | 0 VDC | 0 | 0 | 0 |
| 1795355824 | 3.99 VDC | 0 VDC | 0 | 0 | 0 |
| 1795354924 | 3.98 VDC | 0 VDC | 0 | 0 | 0 |
| 1795354023 | 3.97 VDC | 0 VDC | 0 | 0 | 0 |
| 1795353122 | 3.96 VDC | 0 VDC | 0 | 0 | 0 |
| 1795352223 | 3.93 VDC | 0 VDC | 0 | 0 | 0 |
| 1795351321 | 3.91 VDC | 0 VDC | 0 | 0 | 0 |
| 1795331877 | 3.6 VDC | 0 VDC | 0 | 0 | 0 |
| 1795330976 | 3.61 VDC | 0 VDC | 0 | 0 | 0 |
| 1795330075 | 3.63 VDC | 0 VDC | 0 | 0 | 0 |
| 1795329175 | 3.65 VDC | 0 VDC | 0 | 0 | 0 |
| 1795328274 | 3.66 VDC | 0 VDC | 0 | 0 | 0 |
| 1795327373 | 3.68 VDC | 0 VDC | 0 | 0 | 0 |
| 1795326472 | 3.69 VDC | 0 VDC | 0 | 0 | 0 |
| 1795325571 | 3.71 VDC | 0 VDC | 0 | 0 | 0 |
| 1795324671 | 3.72 VDC | 0 VDC | 0 | 0 | 0 |
| 1795323770 | 3.72 VDC | 0 VDC | 0 | 0 | 0 |
| 1795322869 | 3.73 VDC | 0 VDC | 0 | 0 | 0 |
| 1795321968 | 3.74 VDC | 0 VDC | 0 | 0 | 0 |
| 1795321068 | 3.75 VDC | 0 VDC | 0 | 0 | 0 |
| 1795320167 | 3.76 VDC | 0 VDC | 0 | 0 | 0 |
| 1795319266 | 3.77 VDC | 0 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)