This is the latest recevied telemetry packets stored in our database for station/object SQ1JKB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1754385449 | 862 Count | 258 Count | 0 Count | 4.38 VDC | 0.14 VDC |
| 1754383646 | 861 Count | 258 Count | 0 Count | 4.36 VDC | 0.14 VDC |
| 1754381843 | 860 Count | 258 Count | 0 Count | 4.39 VDC | 0.14 VDC |
| 1754380040 | 859 Count | 258 Count | 0 Count | 4.31 VDC | 0.14 VDC |
| 1754378237 | 858 Count | 258 Count | 0 Count | 4.35 VDC | 0.14 VDC |
| 1754376435 | 857 Count | 258 Count | 0 Count | 4.38 VDC | 0.14 VDC |
| 1754374632 | 856 Count | 258 Count | 0 Count | 4.37 VDC | 0.14 VDC |
| 1754372829 | 855 Count | 258 Count | 0 Count | 4.37 VDC | 0.14 VDC |
| 1754371026 | 854 Count | 258 Count | 0 Count | 4.37 VDC | 0.14 VDC |
| 1754369223 | 853 Count | 258 Count | 0 Count | 4.39 VDC | 0.14 VDC |
| 1754367455 | 852 Count | 258 Count | 0 Count | 4.37 VDC | 0.14 VDC |
| 1754365652 | 851 Count | 258 Count | 0 Count | 4.41 VDC | 0.14 VDC |
| 1754363850 | 850 Count | 258 Count | 0 Count | 4.36 VDC | 0.14 VDC |
| 1754362047 | 849 Count | 258 Count | 0 Count | 4.39 VDC | 0.14 VDC |
| 1754360244 | 848 Count | 258 Count | 0 Count | 4.4 VDC | 0.14 VDC |
| 1754358441 | 847 Count | 258 Count | 0 Count | 4.41 VDC | 0.14 VDC |
| 1754356638 | 846 Count | 258 Count | 0 Count | 4.39 VDC | 0.14 VDC |
| 1754354835 | 845 Count | 258 Count | 0 Count | 4.36 VDC | 0.14 VDC |
| 1754353032 | 844 Count | 258 Count | 0 Count | 4.36 VDC | 0.14 VDC |
| 1754351230 | 843 Count | 258 Count | 0 Count | 4.34 VDC | 0.14 VDC |
| 1754349427 | 842 Count | 258 Count | 0 Count | 4.38 VDC | 0.14 VDC |
| 1754347624 | 841 Count | 258 Count | 0 Count | 4.34 VDC | 0.14 VDC |
| 1754345855 | 840 Count | 258 Count | 0 Count | 4.41 VDC | 0.14 VDC |
| 1754344052 | 839 Count | 258 Count | 0 Count | 4.36 VDC | 0.14 VDC |
| 1754342249 | 838 Count | 258 Count | 0 Count | 4.39 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)