This is the latest recevied telemetry packets stored in our database for station/object DO2MIB-21. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Bat* | qAO* | DB0TOD-11* | qAO* | DB0TOD-11* |
|---|---|---|---|---|---|
| 1754227634 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1754226734 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1754225834 | 4.18 VDC | 0 | 0 | 0 | 0 |
| 1754224934 | 4.18 VDC | 0 | 0 | 0 | 0 |
| 1754224034 | 4.19 VDC | 0 | 0 | 0 | 0 |
| 1754223134 | 4.18 VDC | 0 | 0 | 0 | 0 |
| 1754222234 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1754221333 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1754220433 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1754219533 | 4.18 VDC | 0 | 0 | 0 | 0 |
| 1754218633 | 4.19 VDC | 0 | 0 | 0 | 0 |
| 1754217733 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1754216833 | 4.19 VDC | 0 | 0 | 0 | 0 |
| 1754215933 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1754215033 | 4.18 VDC | 0 | 0 | 0 | 0 |
| 1754214133 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1754213233 | 4.19 VDC | 0 | 0 | 0 | 0 |
| 1754212332 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1754212208 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1754212140 | 4.18 VDC | 0 | 0 | 0 | 0 |
| 1754212114 | 4.18 VDC | 0 | 0 | 0 | 0 |
| 1754212097 | 4.18 VDC | 0 | 0 | 0 | 0 |
| 1754212081 | 4.19 VDC | 0 | 0 | 0 | 0 |
| 1754212063 | 4.18 VDC | 0 | 0 | 0 | 0 |
| 1754212042 | 4.18 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Bat: 0, 0.01, 0
qAO: 0, 1, 0
DB0TOD-11: 0, 1, 0
qAO: 0, 1, 0
DB0TOD-11: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)