This is the latest recevied telemetry packets stored in our database for station/object CE3VRT-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1779384066 | 4.2 VDC | 0 | 0 | 0 | 0 |
| 1779376876 | 4.08 VDC | 0 | 0 | 0 | 0 |
| 1779371481 | 4.01 VDC | 0 | 0 | 0 | 0 |
| 1779369684 | 3.98 VDC | 0 | 0 | 0 | 0 |
| 1779363174 | 3.96 VDC | 0 | 0 | 0 | 0 |
| 1779361375 | 3.96 VDC | 0 | 0 | 0 | 0 |
| 1779359578 | 3.97 VDC | 0 | 0 | 0 | 0 |
| 1779357780 | 3.98 VDC | 0 | 0 | 0 | 0 |
| 1779355982 | 3.98 VDC | 0 | 0 | 0 | 0 |
| 1779354186 | 3.99 VDC | 0 | 0 | 0 | 0 |
| 1779348792 | 4.01 VDC | 0 | 0 | 0 | 0 |
| 1779345195 | 4.01 VDC | 0 | 0 | 0 | 0 |
| 1779343398 | 4.01 VDC | 0 | 0 | 0 | 0 |
| 1779341600 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1779339803 | 4.03 VDC | 0 | 0 | 0 | 0 |
| 1779336207 | 4.04 VDC | 0 | 0 | 0 | 0 |
| 1779334409 | 4.04 VDC | 0 | 0 | 0 | 0 |
| 1779332614 | 4.05 VDC | 0 | 0 | 0 | 0 |
| 1779325421 | 4.07 VDC | 0 | 0 | 0 | 0 |
| 1779321827 | 4.08 VDC | 0 | 0 | 0 | 0 |
| 1779314618 | 4.11 VDC | 0 | 0 | 0 | 0 |
| 1779312937 | 4.12 VDC | 0 | 0 | 0 | 0 |
| 1779311139 | 4.13 VDC | 0 | 0 | 0 | 0 |
| 1779309341 | 4.12 VDC | 0 | 0 | 0 | 0 |
| 1779305746 | 4.14 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)