This is the latest recevied telemetry packets stored in our database for station/object YO3JAZ-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1758377393 | 2.87 VDC | 2.88 VDC | 0 | 0 | 0 |
| 1758375593 | 2.94 VDC | 2.94 VDC | 0 | 0 | 0 |
| 1758374694 | 2.98 VDC | 2.98 VDC | 0 | 0 | 0 |
| 1758373795 | 2.99 VDC | 2.98 VDC | 0 | 0 | 0 |
| 1758372896 | 3.01 VDC | 3 VDC | 0 | 0 | 0 |
| 1758371981 | 3 VDC | 3 VDC | 0 | 0 | 0 |
| 1758370171 | 2.89 VDC | 2.88 VDC | 0 | 0 | 0 |
| 1758369270 | 2.93 VDC | 2.92 VDC | 0 | 0 | 0 |
| 1758368371 | 2.96 VDC | 2.96 VDC | 0 | 0 | 0 |
| 1758367471 | 3 VDC | 3 VDC | 0 | 0 | 0 |
| 1758366571 | 3.02 VDC | 3.02 VDC | 0 | 0 | 0 |
| 1758365670 | 3.02 VDC | 3.02 VDC | 0 | 0 | 0 |
| 1758364770 | 3.01 VDC | 3 VDC | 0 | 0 | 0 |
| 1758363871 | 3.02 VDC | 3.02 VDC | 0 | 0 | 0 |
| 1758362971 | 3.03 VDC | 3.02 VDC | 0 | 0 | 0 |
| 1758361172 | 3.05 VDC | 3.04 VDC | 0 | 0 | 0 |
| 1758360274 | 3.07 VDC | 3.06 VDC | 0 | 0 | 0 |
| 1758359375 | 3.09 VDC | 3.08 VDC | 0 | 0 | 0 |
| 1758358475 | 3.11 VDC | 3.1 VDC | 0 | 0 | 0 |
| 1758357575 | 3.12 VDC | 3.12 VDC | 0 | 0 | 0 |
| 1758356676 | 3.14 VDC | 3.14 VDC | 0 | 0 | 0 |
| 1758354878 | 3.15 VDC | 3.14 VDC | 0 | 0 | 0 |
| 1758353979 | 3.15 VDC | 3.14 VDC | 0 | 0 | 0 |
| 1758307713 | 2.82 VDC | 2.82 VDC | 0 | 0 | 0 |
| 1758306812 | 2.91 VDC | 2.9 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)