This is the latest recevied telemetry packets stored in our database for station/object VK2TBL-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791485067 | 981 Count | 820 Count | 701 Count | 4.25 VDC | 0.14 VDC |
| 1791483264 | 978 Count | 818 Count | 699 Count | 4.26 VDC | 0.14 VDC |
| 1791481460 | 975 Count | 816 Count | 697 Count | 4.26 VDC | 0.14 VDC |
| 1791479657 | 972 Count | 814 Count | 695 Count | 4.29 VDC | 0.14 VDC |
| 1791477854 | 969 Count | 812 Count | 693 Count | 4.23 VDC | 0.14 VDC |
| 1791476051 | 966 Count | 810 Count | 691 Count | 4.3 VDC | 0.14 VDC |
| 1791474248 | 963 Count | 808 Count | 689 Count | 4.29 VDC | 0.14 VDC |
| 1791472445 | 960 Count | 806 Count | 687 Count | 4.25 VDC | 0.14 VDC |
| 1791470641 | 957 Count | 804 Count | 685 Count | 4.31 VDC | 0.14 VDC |
| 1791468909 | 950 Count | 802 Count | 683 Count | 4.26 VDC | 0.14 VDC |
| 1791467106 | 947 Count | 800 Count | 681 Count | 4.26 VDC | 0.14 VDC |
| 1791465302 | 944 Count | 798 Count | 679 Count | 4.26 VDC | 0.14 VDC |
| 1791463499 | 941 Count | 796 Count | 677 Count | 4.28 VDC | 0.14 VDC |
| 1791461696 | 938 Count | 794 Count | 675 Count | 4.26 VDC | 0.14 VDC |
| 1791459893 | 935 Count | 792 Count | 673 Count | 4.25 VDC | 0.14 VDC |
| 1791458090 | 932 Count | 790 Count | 671 Count | 4.26 VDC | 0.14 VDC |
| 1791456286 | 929 Count | 788 Count | 669 Count | 4.24 VDC | 0.14 VDC |
| 1791454483 | 926 Count | 786 Count | 667 Count | 4.26 VDC | 0.14 VDC |
| 1791452680 | 923 Count | 784 Count | 665 Count | 4.28 VDC | 0.14 VDC |
| 1791450877 | 920 Count | 782 Count | 663 Count | 4.26 VDC | 0.14 VDC |
| 1791449073 | 917 Count | 780 Count | 661 Count | 4.28 VDC | 0.14 VDC |
| 1791447270 | 914 Count | 778 Count | 659 Count | 4.25 VDC | 0.14 VDC |
| 1791445467 | 911 Count | 776 Count | 657 Count | 4.3 VDC | 0.14 VDC |
| 1791443664 | 908 Count | 774 Count | 655 Count | 4.27 VDC | 0.14 VDC |
| 1791441861 | 905 Count | 772 Count | 653 Count | 4.27 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)