This is the latest recevied telemetry packets stored in our database for station/object SQ1BHQ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1762774316 | 161 Count | 359 Count | 114 Count | 4.28 VDC | 0.14 VDC |
| 1762772511 | 160 Count | 359 Count | 114 Count | 4.25 VDC | 0.14 VDC |
| 1762770708 | 159 Count | 359 Count | 114 Count | 4.28 VDC | 0.14 VDC |
| 1762768905 | 158 Count | 359 Count | 114 Count | 4.29 VDC | 0.14 VDC |
| 1762767102 | 157 Count | 359 Count | 114 Count | 4.26 VDC | 0.14 VDC |
| 1762765300 | 156 Count | 359 Count | 114 Count | 4.27 VDC | 0.14 VDC |
| 1762763497 | 155 Count | 359 Count | 114 Count | 4.27 VDC | 0.14 VDC |
| 1762761694 | 154 Count | 359 Count | 114 Count | 4.24 VDC | 0.14 VDC |
| 1762759891 | 153 Count | 359 Count | 114 Count | 4.3 VDC | 0.14 VDC |
| 1762758088 | 152 Count | 359 Count | 114 Count | 4.28 VDC | 0.14 VDC |
| 1762756286 | 151 Count | 359 Count | 114 Count | 4.27 VDC | 0.14 VDC |
| 1762754483 | 150 Count | 359 Count | 114 Count | 4.27 VDC | 0.14 VDC |
| 1762752712 | 149 Count | 359 Count | 114 Count | 4.29 VDC | 0.14 VDC |
| 1762750910 | 142 Count | 353 Count | 108 Count | 4.23 VDC | 0.14 VDC |
| 1762749107 | 141 Count | 353 Count | 108 Count | 4.24 VDC | 0.14 VDC |
| 1762747304 | 140 Count | 353 Count | 108 Count | 4.25 VDC | 0.14 VDC |
| 1762745501 | 139 Count | 353 Count | 108 Count | 4.25 VDC | 0.14 VDC |
| 1762743699 | 138 Count | 353 Count | 108 Count | 4.29 VDC | 0.14 VDC |
| 1762741896 | 137 Count | 353 Count | 108 Count | 4.32 VDC | 0.14 VDC |
| 1762740093 | 136 Count | 353 Count | 108 Count | 4.25 VDC | 0.14 VDC |
| 1762738290 | 135 Count | 353 Count | 108 Count | 4.23 VDC | 0.14 VDC |
| 1762736487 | 134 Count | 353 Count | 108 Count | 4.23 VDC | 0.14 VDC |
| 1762734685 | 133 Count | 353 Count | 108 Count | 4.23 VDC | 0.14 VDC |
| 1762732882 | 132 Count | 353 Count | 108 Count | 4.29 VDC | 0.14 VDC |
| 1762731112 | 131 Count | 353 Count | 108 Count | 4.26 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)