This is the latest recevied telemetry packets stored in our database for station/object 9W2GDB-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1771544739 | 9 Count | 17 Count | 9 Count | 4.04 VDC | 0.08 VDC |
| 1771542935 | 834 Count | 1002 Count | 725 Count | 4.04 VDC | 0.08 VDC |
| 1771541130 | 829 Count | 997 Count | 721 Count | 4.04 VDC | 0.08 VDC |
| 1771539322 | 824 Count | 992 Count | 717 Count | 4.02 VDC | 0.08 VDC |
| 1771537517 | 819 Count | 987 Count | 713 Count | 4.02 VDC | 0.08 VDC |
| 1771535713 | 814 Count | 982 Count | 709 Count | 4.03 VDC | 0.08 VDC |
| 1771533908 | 809 Count | 977 Count | 705 Count | 4.03 VDC | 0.08 VDC |
| 1771532103 | 804 Count | 972 Count | 701 Count | 4.03 VDC | 0.08 VDC |
| 1771530298 | 799 Count | 967 Count | 697 Count | 4.03 VDC | 0.08 VDC |
| 1771528494 | 794 Count | 962 Count | 693 Count | 4.03 VDC | 0.08 VDC |
| 1771526689 | 789 Count | 957 Count | 689 Count | 4.03 VDC | 0.08 VDC |
| 1771524885 | 784 Count | 952 Count | 685 Count | 4.03 VDC | 0.08 VDC |
| 1771523138 | 779 Count | 947 Count | 681 Count | 4.03 VDC | 0.08 VDC |
| 1771521334 | 774 Count | 942 Count | 677 Count | 4.03 VDC | 0.08 VDC |
| 1771519529 | 769 Count | 937 Count | 673 Count | 4.03 VDC | 0.08 VDC |
| 1771517724 | 764 Count | 932 Count | 669 Count | 4.03 VDC | 0.08 VDC |
| 1771515920 | 759 Count | 927 Count | 665 Count | 4.03 VDC | 0.08 VDC |
| 1771514115 | 754 Count | 922 Count | 661 Count | 4.03 VDC | 0.08 VDC |
| 1771512311 | 749 Count | 917 Count | 657 Count | 4.03 VDC | 0.08 VDC |
| 1771510506 | 744 Count | 912 Count | 653 Count | 4.03 VDC | 0.08 VDC |
| 1771508701 | 739 Count | 907 Count | 649 Count | 4.03 VDC | 0.08 VDC |
| 1771506896 | 734 Count | 902 Count | 645 Count | 4.03 VDC | 0.08 VDC |
| 1771505092 | 729 Count | 897 Count | 641 Count | 4.03 VDC | 0.08 VDC |
| 1771503287 | 724 Count | 892 Count | 637 Count | 4.03 VDC | 0.08 VDC |
| 1771503057 | 722 Count | 890 Count | 636 Count | 4.03 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)