This is the latest recevied telemetry packets stored in our database for station/object OK2ILA-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791442537 | 4.19 VDC | 15.2 C | 8080 | 0 | 0 |
| 1791441634 | 4.19 VDC | 14.4 C | 8071 | 0 | 0 |
| 1791440732 | 4.17 VDC | 13.4 C | 8074 | 0 | 0 |
| 1791440716 | 4.17 VDC | 13.4 C | 8076 | 0 | 0 |
| 1791440691 | 4.17 VDC | 13.3 C | 8075 | 0 | 0 |
| 1791440672 | 4.17 VDC | 13.3 C | 8077 | 0 | 0 |
| 1791440657 | 4.17 VDC | 13.3 C | 8074 | 0 | 0 |
| 1791440628 | 4.17 VDC | 13.2 C | 8075 | 0 | 0 |
| 1791440596 | 4.17 VDC | 13.2 C | 8074 | 0 | 0 |
| 1791440581 | 4.17 VDC | 13.2 C | 8075 | 0 | 0 |
| 1791440566 | 4.17 VDC | 13.2 C | 8070 | 0 | 0 |
| 1791440547 | 4.17 VDC | 13.2 C | 8072 | 0 | 0 |
| 1791440485 | 4.19 VDC | 13.2 C | 8101 | 0 | 0 |
| 1791439582 | 4.19 VDC | 13.2 C | 8069 | 0 | 0 |
| 1791439444 | 4.19 VDC | 13 C | 8063 | 0 | 0 |
| 1791439427 | 4.19 VDC | 13 C | 8061 | 0 | 0 |
| 1791439375 | 4.19 VDC | 13 C | 8066 | 0 | 0 |
| 1791439360 | 4.19 VDC | 13 C | 8067 | 0 | 0 |
| 1791439097 | 4.19 VDC | 12.9 C | 8050 | 0 | 0 |
| 1791438848 | 4.17 VDC | 12.9 C | 8046 | 0 | 0 |
| 1791438833 | 4.17 VDC | 12.9 C | 8045 | 0 | 0 |
| 1791438815 | 4.17 VDC | 12.9 C | 8045 | 0 | 0 |
| 1791438797 | 4.19 VDC | 12.9 C | 8048 | 0 | 0 |
| 1791438774 | 4.19 VDC | 12.9 C | 8052 | 0 | 0 |
| 1791438755 | 4.19 VDC | 12.9 C | 8060 | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)