This is the latest recevied telemetry packets stored in our database for station/object PD1EG-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791442462 | 0 Count | 0 Count | 0 Count | 4.04 VDC | 0 VDC |
| 1791440661 | 0 Count | 0 Count | 0 Count | 4.04 VDC | 0 VDC |
| 1791438861 | 0 Count | 0 Count | 0 Count | 4.04 VDC | 0 VDC |
| 1791437061 | 0 Count | 0 Count | 0 Count | 4.04 VDC | 0 VDC |
| 1791435261 | 0 Count | 0 Count | 0 Count | 4.04 VDC | 0 VDC |
| 1791433461 | 0 Count | 0 Count | 0 Count | 4.04 VDC | 0 VDC |
| 1791431660 | 0 Count | 0 Count | 0 Count | 4.04 VDC | 0 VDC |
| 1791429860 | 0 Count | 0 Count | 0 Count | 4.04 VDC | 0 VDC |
| 1791428060 | 0 Count | 0 Count | 0 Count | 4.04 VDC | 0 VDC |
| 1791426260 | 0 Count | 0 Count | 0 Count | 4.04 VDC | 0 VDC |
| 1791424460 | 0 Count | 0 Count | 0 Count | 4.03 VDC | 0 VDC |
| 1791422661 | 0 Count | 0 Count | 0 Count | 4.04 VDC | 0 VDC |
| 1791420861 | 0 Count | 0 Count | 0 Count | 4.04 VDC | 0 VDC |
| 1791419061 | 0 Count | 0 Count | 0 Count | 4.04 VDC | 0 VDC |
| 1791417260 | 0 Count | 0 Count | 0 Count | 4.04 VDC | 0 VDC |
| 1791415460 | 0 Count | 0 Count | 0 Count | 4.04 VDC | 0 VDC |
| 1791413660 | 0 Count | 0 Count | 0 Count | 4.04 VDC | 0 VDC |
| 1791411860 | 0 Count | 0 Count | 0 Count | 4.04 VDC | 0 VDC |
| 1791410060 | 0 Count | 0 Count | 0 Count | 4.04 VDC | 0 VDC |
| 1791408260 | 0 Count | 0 Count | 0 Count | 4.04 VDC | 0 VDC |
| 1791406459 | 0 Count | 0 Count | 0 Count | 4.04 VDC | 0 VDC |
| 1791404659 | 0 Count | 0 Count | 0 Count | 4.04 VDC | 0 VDC |
| 1791402859 | 0 Count | 0 Count | 0 Count | 4.04 VDC | 0 VDC |
| 1791401060 | 0 Count | 0 Count | 0 Count | 4.04 VDC | 0 VDC |
| 1791399260 | 0 Count | 0 Count | 0 Count | 4.04 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)