This is the latest recevied telemetry packets stored in our database for station/object SR2LMU-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1795358768 | 0 Count | 126 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1795355167 | 0 Count | 114 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1795351567 | 0 Count | 108 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1795347968 | 0 Count | 101 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1795344368 | 0 Count | 95 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1795340768 | 0 Count | 89 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1795337167 | 0 Count | 81 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1795333567 | 0 Count | 74 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1795329967 | 0 Count | 67 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1795326367 | 0 Count | 61 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1795322767 | 0 Count | 55 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1795319167 | 0 Count | 48 Count | 0 Count | 3.9 VDC | 0 VDC |
| 1795315567 | 0 Count | 42 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1795311966 | 0 Count | 30 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1795308366 | 0 Count | 23 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1795304766 | 0 Count | 15 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1795301166 | 0 Count | 6 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1795297566 | 14 Count | 1006 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1795293966 | 8 Count | 993 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1795290365 | 1 Count | 984 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1795286765 | 1 Count | 978 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1795283165 | 1 Count | 971 Count | 0 Count | 3.9 VDC | 0 VDC |
| 1795279565 | 1 Count | 961 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1795275965 | 1 Count | 954 Count | 0 Count | 3.91 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)