This is the latest recevied telemetry packets stored in our database for station/object SP7THR-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1754143042 | 0 Count | 905 Count | 0 Count | 0 VDC | 0 VDC |
| 1754141842 | 0 Count | 903 Count | 0 Count | 0 VDC | 0 VDC |
| 1754140642 | 0 Count | 903 Count | 0 Count | 0 VDC | 0 VDC |
| 1754139442 | 0 Count | 901 Count | 0 Count | 0 VDC | 0 VDC |
| 1754138242 | 0 Count | 899 Count | 0 Count | 0 VDC | 0 VDC |
| 1754137042 | 0 Count | 897 Count | 0 Count | 0 VDC | 0 VDC |
| 1754135842 | 0 Count | 895 Count | 0 Count | 0 VDC | 0 VDC |
| 1754134642 | 0 Count | 893 Count | 0 Count | 0 VDC | 0 VDC |
| 1754133442 | 0 Count | 891 Count | 0 Count | 0 VDC | 0 VDC |
| 1754132242 | 0 Count | 889 Count | 0 Count | 0 VDC | 0 VDC |
| 1754131042 | 0 Count | 887 Count | 0 Count | 0 VDC | 0 VDC |
| 1754129842 | 0 Count | 885 Count | 0 Count | 0 VDC | 0 VDC |
| 1754128642 | 0 Count | 883 Count | 0 Count | 0 VDC | 0 VDC |
| 1754127442 | 0 Count | 881 Count | 0 Count | 0 VDC | 0 VDC |
| 1754126242 | 0 Count | 879 Count | 0 Count | 0 VDC | 0 VDC |
| 1754125042 | 0 Count | 877 Count | 0 Count | 0 VDC | 0 VDC |
| 1754123842 | 0 Count | 875 Count | 0 Count | 0 VDC | 0 VDC |
| 1754122641 | 0 Count | 873 Count | 0 Count | 0 VDC | 0 VDC |
| 1754121441 | 0 Count | 871 Count | 0 Count | 0 VDC | 0 VDC |
| 1754120241 | 0 Count | 869 Count | 0 Count | 0 VDC | 0 VDC |
| 1754119041 | 0 Count | 867 Count | 0 Count | 0 VDC | 0 VDC |
| 1754117841 | 0 Count | 863 Count | 0 Count | 0 VDC | 0 VDC |
| 1754116641 | 0 Count | 849 Count | 0 Count | 0 VDC | 0 VDC |
| 1754115441 | 0 Count | 838 Count | 0 Count | 0 VDC | 0 VDC |
| 1754114241 | 0 Count | 836 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)