This is the latest recevied telemetry packets stored in our database for station/object SP9DAT-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1758412578 | 323 Count | 584 Count | 154 Count | 3.98 VDC | 0 VDC |
| 1758411677 | 321 Count | 579 Count | 153 Count | 3.98 VDC | 0 VDC |
| 1758410776 | 320 Count | 575 Count | 153 Count | 3.98 VDC | 0 VDC |
| 1758409876 | 318 Count | 571 Count | 152 Count | 3.98 VDC | 0 VDC |
| 1758408975 | 316 Count | 568 Count | 151 Count | 3.98 VDC | 0 VDC |
| 1758408074 | 314 Count | 565 Count | 150 Count | 3.98 VDC | 0 VDC |
| 1758407173 | 313 Count | 563 Count | 150 Count | 3.98 VDC | 0 VDC |
| 1758406272 | 312 Count | 560 Count | 150 Count | 3.98 VDC | 0 VDC |
| 1758405371 | 311 Count | 558 Count | 150 Count | 3.98 VDC | 0 VDC |
| 1758404471 | 310 Count | 555 Count | 150 Count | 3.98 VDC | 0 VDC |
| 1758403570 | 308 Count | 549 Count | 149 Count | 3.98 VDC | 0 VDC |
| 1758402669 | 306 Count | 545 Count | 148 Count | 3.98 VDC | 0 VDC |
| 1758401768 | 304 Count | 541 Count | 147 Count | 3.98 VDC | 0 VDC |
| 1758400867 | 302 Count | 539 Count | 146 Count | 3.98 VDC | 0 VDC |
| 1758399966 | 300 Count | 534 Count | 145 Count | 3.98 VDC | 0 VDC |
| 1758399066 | 298 Count | 532 Count | 144 Count | 3.98 VDC | 0 VDC |
| 1758397264 | 294 Count | 528 Count | 142 Count | 3.98 VDC | 0 VDC |
| 1758395462 | 290 Count | 526 Count | 140 Count | 3.98 VDC | 0 VDC |
| 1758393661 | 286 Count | 524 Count | 138 Count | 3.98 VDC | 0 VDC |
| 1758391859 | 282 Count | 521 Count | 136 Count | 3.97 VDC | 0 VDC |
| 1758390135 | 274 Count | 519 Count | 134 Count | 3.99 VDC | 0 VDC |
| 1758389234 | 273 Count | 519 Count | 134 Count | 3.99 VDC | 0 VDC |
| 1758388333 | 272 Count | 519 Count | 134 Count | 3.99 VDC | 0 VDC |
| 1758387432 | 270 Count | 518 Count | 133 Count | 3.99 VDC | 0 VDC |
| 1758386532 | 268 Count | 517 Count | 132 Count | 3.99 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)