This is the latest recevied telemetry packets stored in our database for station/object DL3TU-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791445979 | 397 | 0 | 0 | 0 | 0 |
| 1791445078 | 396 | 0 | 0 | 0 | 0 |
| 1791444179 | 397 | 0 | 0 | 0 | 0 |
| 1791443279 | 397 | 0 | 0 | 0 | 0 |
| 1791442378 | 398 | 0 | 0 | 0 | 0 |
| 1791441478 | 398 | 0 | 0 | 0 | 0 |
| 1791440578 | 397 | 0 | 0 | 0 | 0 |
| 1791439678 | 398 | 0 | 0 | 0 | 0 |
| 1791438778 | 398 | 0 | 0 | 0 | 0 |
| 1791437878 | 397 | 0 | 0 | 0 | 0 |
| 1791436978 | 398 | 0 | 0 | 0 | 0 |
| 1791436078 | 398 | 0 | 0 | 0 | 0 |
| 1791435178 | 399 | 0 | 0 | 0 | 0 |
| 1791434278 | 399 | 0 | 0 | 0 | 0 |
| 1791433378 | 399 | 0 | 0 | 0 | 0 |
| 1791432478 | 399 | 0 | 0 | 0 | 0 |
| 1791431578 | 400 | 0 | 0 | 0 | 0 |
| 1791430677 | 398 | 0 | 0 | 0 | 0 |
| 1791429777 | 400 | 0 | 0 | 0 | 0 |
| 1791428877 | 400 | 0 | 0 | 0 | 0 |
| 1791427977 | 400 | 0 | 0 | 0 | 0 |
| 1791427077 | 400 | 0 | 0 | 0 | 0 |
| 1791426177 | 399 | 0 | 0 | 0 | 0 |
| 1791425277 | 401 | 0 | 0 | 0 | 0 |
| 1791424377 | 401 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)