This is the latest recevied telemetry packets stored in our database for station/object F1IUQ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1758396490 | 421 | 0 | 0 | 0 | 0 |
| 1758395590 | 430 | 0 | 0 | 0 | 0 |
| 1758394689 | 425 | 0 | 0 | 0 | 0 |
| 1758393789 | 431 | 0 | 0 | 0 | 0 |
| 1758392889 | 429 | 0 | 0 | 0 | 0 |
| 1758391989 | 432 | 0 | 0 | 0 | 0 |
| 1758391089 | 430 | 0 | 0 | 0 | 0 |
| 1758390189 | 435 | 0 | 0 | 0 | 0 |
| 1758389289 | 432 | 0 | 0 | 0 | 0 |
| 1758388389 | 428 | 0 | 0 | 0 | 0 |
| 1758387489 | 425 | 0 | 0 | 0 | 0 |
| 1758386588 | 425 | 0 | 0 | 0 | 0 |
| 1758385688 | 423 | 0 | 0 | 0 | 0 |
| 1758384788 | 423 | 0 | 0 | 0 | 0 |
| 1758383888 | 433 | 0 | 0 | 0 | 0 |
| 1758382988 | 428 | 0 | 0 | 0 | 0 |
| 1758382088 | 428 | 0 | 0 | 0 | 0 |
| 1758381187 | 423 | 0 | 0 | 0 | 0 |
| 1758380286 | 425 | 0 | 0 | 0 | 0 |
| 1758379382 | 422 | 0 | 0 | 0 | 0 |
| 1758378482 | 425 | 0 | 0 | 0 | 0 |
| 1758377582 | 432 | 0 | 0 | 0 | 0 |
| 1758376682 | 433 | 0 | 0 | 0 | 0 |
| 1758375782 | 431 | 0 | 0 | 0 | 0 |
| 1758374881 | 425 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)