EA2RCF LoRa APRS MAP Backup

My position About Go to MAIN map Powered by EA2RCF Radioclub Foronda ☰

reset

LZ0VRC-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LZ0VRC-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Humi*	Presaure*	Power*
1766758537	0 C	82.8 %RH	982 hPa	5.62 V
1766758532	0 C	82.8 %RH	982 hPa	5.62 V
1766758237	0.01 C	82.8 %RH	982 hPa	5.6 V
1766757937	0.3 C	82.8 %RH	982 hPa	5.68 V
1766757932	0.3 C	82.8 %RH	982 hPa	5.68 V
1766757637	0.51 C	82.8 %RH	982 hPa	5.61 V
1766757337	0.61 C	82.8 %RH	983 hPa	5.68 V
1766757332	0.62 C	82.8 %RH	983 hPa	5.67 V
1766757037	0.68 C	82.8 %RH	983 hPa	5.62 V
1766756737	0.62 C	82.8 %RH	983 hPa	5.67 V
1766756732	0.6 C	82.8 %RH	983 hPa	5.62 V
1766756437	0.44 C	82.8 %RH	983 hPa	5.66 V
1766756137	0.63 C	82.8 %RH	983 hPa	5.6 V
1766756132	0.63 C	82.8 %RH	983 hPa	5.6 V
1766755837	2 C	81.09 %RH	983 hPa	5.62 V
1766755537	6.44 C	64.23 %RH	983 hPa	5.62 V
1766755532	6.44 C	64.23 %RH	983 hPa	5.62 V
1766755237	8.68 C	59.16 %RH	983 hPa	5.6 V
1766754937	7.03 C	63 %RH	983 hPa	5.67 V
1766754932	7 C	61.33 %RH	983 hPa	5.65 V
1766754637	6.76 C	61.48 %RH	983 hPa	5.64 V
1766754337	5.46 C	65.75 %RH	983 hPa	5.65 V
1766754332	5.48 C	65.65 %RH	983 hPa	5.65 V
1766754037	6.05 C	63.08 %RH	983 hPa	5.62 V
1766753737	6.51 C	62.19 %RH	984 hPa	5.67 V

*Used Equation Coefficients:

Temp: 0, 0.01, 0

Humi: 0, 0.01, 0

Presaure: 0, 1, 0

Power: 0, 0.01, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)