This is the latest recevied telemetry packets stored in our database for station/object DJ3ABC-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762810542 | 436 | 0 | 0 | 0 | 0 |
| 1762809642 | 431 | 0 | 0 | 0 | 0 |
| 1762808742 | 432 | 0 | 0 | 0 | 0 |
| 1762807842 | 434 | 0 | 0 | 0 | 0 |
| 1762806942 | 433 | 0 | 0 | 0 | 0 |
| 1762806042 | 430 | 0 | 0 | 0 | 0 |
| 1762805142 | 432 | 0 | 0 | 0 | 0 |
| 1762804242 | 433 | 0 | 0 | 0 | 0 |
| 1762803342 | 436 | 0 | 0 | 0 | 0 |
| 1762802442 | 436 | 0 | 0 | 0 | 0 |
| 1762801542 | 433 | 0 | 0 | 0 | 0 |
| 1762800641 | 431 | 0 | 0 | 0 | 0 |
| 1762799741 | 435 | 0 | 0 | 0 | 0 |
| 1762798841 | 430 | 0 | 0 | 0 | 0 |
| 1762797941 | 434 | 0 | 0 | 0 | 0 |
| 1762797041 | 435 | 0 | 0 | 0 | 0 |
| 1762796141 | 433 | 0 | 0 | 0 | 0 |
| 1762795241 | 432 | 0 | 0 | 0 | 0 |
| 1762794341 | 436 | 0 | 0 | 0 | 0 |
| 1762793441 | 429 | 0 | 0 | 0 | 0 |
| 1762792541 | 431 | 0 | 0 | 0 | 0 |
| 1762791641 | 437 | 0 | 0 | 0 | 0 |
| 1762790741 | 437 | 0 | 0 | 0 | 0 |
| 1762789841 | 431 | 0 | 0 | 0 | 0 |
| 1762788941 | 431 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)