This is the latest recevied telemetry packets stored in our database for station/object G3CWI-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Ext* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795358753 | 13.86 VDC | 0 | 0 | 0 | 0 |
| 1795355155 | 13.9 VDC | 0 | 0 | 0 | 0 |
| 1795351553 | 13.88 VDC | 0 | 0 | 0 | 0 |
| 1795347953 | 13.88 VDC | 0 | 0 | 0 | 0 |
| 1795344353 | 13.92 VDC | 0 | 0 | 0 | 0 |
| 1795340753 | 13.94 VDC | 0 | 0 | 0 | 0 |
| 1795337152 | 12.48 VDC | 0 | 0 | 0 | 0 |
| 1795333552 | 11.96 VDC | 0 | 0 | 0 | 0 |
| 1795329952 | 12 VDC | 0 | 0 | 0 | 0 |
| 1795326352 | 12.04 VDC | 0 | 0 | 0 | 0 |
| 1795322752 | 12.08 VDC | 0 | 0 | 0 | 0 |
| 1795319151 | 12.1 VDC | 0 | 0 | 0 | 0 |
| 1795315550 | 12.12 VDC | 0 | 0 | 0 | 0 |
| 1795311950 | 12.18 VDC | 0 | 0 | 0 | 0 |
| 1795308350 | 12.18 VDC | 0 | 0 | 0 | 0 |
| 1795304750 | 12.2 VDC | 0 | 0 | 0 | 0 |
| 1795301150 | 12.22 VDC | 0 | 0 | 0 | 0 |
| 1795297556 | 12.24 VDC | 0 | 0 | 0 | 0 |
| 1795293949 | 12.26 VDC | 0 | 0 | 0 | 0 |
| 1795290349 | 12.3 VDC | 0 | 0 | 0 | 0 |
| 1795286749 | 12.32 VDC | 0 | 0 | 0 | 0 |
| 1795283149 | 12.36 VDC | 0 | 0 | 0 | 0 |
| 1795279549 | 12.44 VDC | 0 | 0 | 0 | 0 |
| 1795275949 | 13 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Ext: 0, 0.02, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)