This is the latest recevied telemetry packets stored in our database for station/object SP6RJ-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1783290142 | 325 Count | 15 Count | 0 Count | 4.4 VDC | 0 VDC |
| 1783289541 | 316 Count | 15 Count | 0 Count | 4.37 VDC | 0 VDC |
| 1783288941 | 304 Count | 15 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1783288341 | 294 Count | 15 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1783287740 | 286 Count | 15 Count | 0 Count | 4.35 VDC | 0 VDC |
| 1783287140 | 276 Count | 15 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1783286540 | 269 Count | 15 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1783285940 | 260 Count | 15 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1783285339 | 251 Count | 15 Count | 0 Count | 4.35 VDC | 0 VDC |
| 1783284739 | 243 Count | 15 Count | 0 Count | 4.37 VDC | 0 VDC |
| 1783284138 | 234 Count | 15 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1783283538 | 225 Count | 15 Count | 0 Count | 4.36 VDC | 0 VDC |
| 1783282938 | 219 Count | 15 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1783282338 | 209 Count | 15 Count | 0 Count | 4.37 VDC | 0 VDC |
| 1783281737 | 195 Count | 15 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1783281137 | 187 Count | 15 Count | 0 Count | 4.37 VDC | 0 VDC |
| 1783280536 | 178 Count | 15 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1783279936 | 169 Count | 15 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1783279335 | 160 Count | 15 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1783278735 | 153 Count | 15 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1783278135 | 142 Count | 15 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1783277535 | 135 Count | 15 Count | 0 Count | 4.36 VDC | 0 VDC |
| 1783276934 | 128 Count | 15 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1783276334 | 117 Count | 15 Count | 0 Count | 4.36 VDC | 0 VDC |
| 1783275733 | 109 Count | 15 Count | 0 Count | 4.34 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)