This is the latest recevied telemetry packets stored in our database for station/object SR2GKG-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1795359211 | 396 Count | 933 Count | 362 Count | 4.29 VDC | 0 VDC |
| 1795357411 | 379 Count | 889 Count | 346 Count | 4.31 VDC | 0 VDC |
| 1795355610 | 364 Count | 851 Count | 332 Count | 4.29 VDC | 0 VDC |
| 1795353809 | 351 Count | 809 Count | 320 Count | 4.29 VDC | 0 VDC |
| 1795352009 | 334 Count | 758 Count | 304 Count | 4.3 VDC | 0 VDC |
| 1795350208 | 320 Count | 710 Count | 291 Count | 4.27 VDC | 0 VDC |
| 1795348407 | 303 Count | 665 Count | 275 Count | 4.27 VDC | 0 VDC |
| 1795346607 | 277 Count | 618 Count | 250 Count | 4.3 VDC | 0 VDC |
| 1795344806 | 251 Count | 564 Count | 227 Count | 4.27 VDC | 0 VDC |
| 1795343013 | 227 Count | 508 Count | 208 Count | 4.3 VDC | 0 VDC |
| 1795341212 | 211 Count | 469 Count | 193 Count | 4.28 VDC | 0 VDC |
| 1795339412 | 188 Count | 426 Count | 175 Count | 4.3 VDC | 0 VDC |
| 1795337611 | 168 Count | 382 Count | 156 Count | 4.31 VDC | 0 VDC |
| 1795335810 | 144 Count | 326 Count | 133 Count | 4.28 VDC | 0 VDC |
| 1795334010 | 122 Count | 276 Count | 112 Count | 4.3 VDC | 0 VDC |
| 1795332209 | 100 Count | 224 Count | 91 Count | 4.3 VDC | 0 VDC |
| 1795330408 | 79 Count | 174 Count | 71 Count | 4.3 VDC | 0 VDC |
| 1795328608 | 60 Count | 126 Count | 53 Count | 4.3 VDC | 0 VDC |
| 1795326807 | 37 Count | 78 Count | 31 Count | 4.3 VDC | 0 VDC |
| 1795325006 | 19 Count | 41 Count | 14 Count | 4.3 VDC | 0 VDC |
| 1795323205 | 4 Count | 2 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1795321411 | 474 Count | 994 Count | 433 Count | 4.3 VDC | 0 VDC |
| 1795319611 | 455 Count | 953 Count | 415 Count | 4.28 VDC | 0 VDC |
| 1795317810 | 434 Count | 911 Count | 395 Count | 4.3 VDC | 0 VDC |
| 1795316009 | 416 Count | 871 Count | 378 Count | 4.28 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)