This is the latest recevied telemetry packets stored in our database for station/object SP2MG-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1750161500 | 139 Count | 808 Count | 3 Count | 4.27 VDC | 0.14 VDC |
| 1750158495 | 137 Count | 791 Count | 3 Count | 4.25 VDC | 0.14 VDC |
| 1750157356 | 135 Count | 779 Count | 3 Count | 4.3 VDC | 0.14 VDC |
| 1750155550 | 132 Count | 754 Count | 2 Count | 4.31 VDC | 0.14 VDC |
| 1750154471 | 130 Count | 745 Count | 2 Count | 4.3 VDC | 0.14 VDC |
| 1750152665 | 128 Count | 734 Count | 2 Count | 4.31 VDC | 0.14 VDC |
| 1750150859 | 126 Count | 725 Count | 2 Count | 4.25 VDC | 0.14 VDC |
| 1750149053 | 123 Count | 711 Count | 1 Count | 4.27 VDC | 0.14 VDC |
| 1750147248 | 121 Count | 700 Count | 1 Count | 4.26 VDC | 0.14 VDC |
| 1750145442 | 119 Count | 683 Count | 1 Count | 4.33 VDC | 0.14 VDC |
| 1750144824 | 118 Count | 683 Count | 1 Count | 4.29 VDC | 0.14 VDC |
| 1750138880 | 111 Count | 648 Count | 0 Count | 4.32 VDC | 0.14 VDC |
| 1750137074 | 109 Count | 636 Count | 0 Count | 4.29 VDC | 0.14 VDC |
| 1750135268 | 107 Count | 622 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1750133462 | 105 Count | 606 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1750131657 | 103 Count | 588 Count | 0 Count | 4.32 VDC | 0.14 VDC |
| 1750129851 | 101 Count | 575 Count | 0 Count | 4.29 VDC | 0.14 VDC |
| 1750128044 | 99 Count | 561 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1750126239 | 97 Count | 538 Count | 0 Count | 4.25 VDC | 0.14 VDC |
| 1750124433 | 95 Count | 525 Count | 0 Count | 4.25 VDC | 0.14 VDC |
| 1750122627 | 93 Count | 513 Count | 0 Count | 4.33 VDC | 0.14 VDC |
| 1750120890 | 91 Count | 504 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1750119083 | 89 Count | 491 Count | 0 Count | 4.26 VDC | 0.14 VDC |
| 1750117278 | 87 Count | 480 Count | 0 Count | 4.33 VDC | 0.14 VDC |
| 1750115472 | 85 Count | 452 Count | 0 Count | 4.28 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)