This is the latest recevied telemetry packets stored in our database for station/object SP2BYD-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791449883 | 168 Count | 797 Count | 0 Count | 4.22 VDC | 4.48 VDC |
| 1791449584 | 167 Count | 793 Count | 0 Count | 4.18 VDC | 6 VDC |
| 1791449284 | 166 Count | 790 Count | 0 Count | 4.18 VDC | 5.98 VDC |
| 1791448984 | 165 Count | 785 Count | 0 Count | 4.18 VDC | 5.98 VDC |
| 1791448684 | 164 Count | 780 Count | 0 Count | 4.18 VDC | 5.98 VDC |
| 1791448384 | 163 Count | 779 Count | 0 Count | 4.18 VDC | 5.98 VDC |
| 1791448084 | 162 Count | 777 Count | 0 Count | 4.18 VDC | 5.98 VDC |
| 1791447784 | 161 Count | 772 Count | 0 Count | 4.18 VDC | 5.98 VDC |
| 1791447484 | 160 Count | 770 Count | 0 Count | 4.18 VDC | 5.98 VDC |
| 1791447185 | 159 Count | 762 Count | 0 Count | 4.19 VDC | 5.98 VDC |
| 1791446884 | 158 Count | 758 Count | 0 Count | 4.19 VDC | 5.98 VDC |
| 1791446585 | 157 Count | 757 Count | 0 Count | 4.23 VDC | 4.56 VDC |
| 1791446285 | 156 Count | 752 Count | 0 Count | 4.22 VDC | 4.46 VDC |
| 1791445985 | 155 Count | 747 Count | 0 Count | 4.25 VDC | 5.9 VDC |
| 1791445684 | 154 Count | 736 Count | 0 Count | 4.24 VDC | 4.88 VDC |
| 1791445385 | 153 Count | 734 Count | 0 Count | 4.2 VDC | 4.52 VDC |
| 1791445085 | 152 Count | 729 Count | 0 Count | 4.17 VDC | 4.36 VDC |
| 1791444785 | 151 Count | 727 Count | 0 Count | 4.16 VDC | 4.44 VDC |
| 1791444485 | 150 Count | 723 Count | 0 Count | 4.16 VDC | 4.46 VDC |
| 1791444185 | 149 Count | 719 Count | 0 Count | 4.16 VDC | 4.3 VDC |
| 1791443884 | 148 Count | 716 Count | 0 Count | 4.16 VDC | 4.28 VDC |
| 1791443584 | 147 Count | 716 Count | 0 Count | 4.15 VDC | 4.28 VDC |
| 1791443284 | 146 Count | 711 Count | 0 Count | 4.15 VDC | 4.26 VDC |
| 1791442984 | 145 Count | 708 Count | 0 Count | 4.15 VDC | 4.26 VDC |
| 1791442685 | 144 Count | 705 Count | 0 Count | 4.15 VDC | 4.26 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)