EA2RCF LoRa APRS MAP Backup

My position About Go to MAIN map Powered by EA2RCF Radioclub Foronda ☰

reset

SQ9PD-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SQ9PD-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*
1766739251	20 Count	237 Count	16 Count
1766738350	19 Count	228 Count	16 Count
1766737449	14 Count	164 Count	12 Count
1766736548	8 Count	84 Count	7 Count
1766735647	4 Count	40 Count	4 Count
1766734747	122 Count	1010 Count	95 Count
1766733846	121 Count	999 Count	95 Count
1766732945	116 Count	962 Count	91 Count
1766732044	112 Count	922 Count	88 Count
1766731144	107 Count	877 Count	84 Count
1766730243	103 Count	839 Count	81 Count
1766729342	99 Count	807 Count	78 Count
1766728442	94 Count	765 Count	74 Count
1766727541	88 Count	716 Count	69 Count
1766726640	84 Count	672 Count	66 Count
1766725740	78 Count	627 Count	61 Count
1766724838	73 Count	579 Count	57 Count
1766723937	68 Count	523 Count	53 Count
1766723036	63 Count	478 Count	49 Count
1766722152	54 Count	442 Count	45 Count
1766721251	49 Count	400 Count	41 Count
1766720351	43 Count	350 Count	36 Count
1766719450	38 Count	306 Count	32 Count
1766718549	32 Count	269 Count	27 Count
1766717648	27 Count	231 Count	23 Count

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)