This is the latest recevied telemetry packets stored in our database for station/object XE2ERA-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791476421 | 447 Count | 919 Count | 300 Count | 3.92 VDC | 0.08 VDC |
| 1791475516 | 444 Count | 910 Count | 298 Count | 3.92 VDC | 0.08 VDC |
| 1791474712 | 441 Count | 902 Count | 296 Count | 3.92 VDC | 0.08 VDC |
| 1791473808 | 438 Count | 897 Count | 294 Count | 3.91 VDC | 0.08 VDC |
| 1791472904 | 435 Count | 890 Count | 292 Count | 3.91 VDC | 0.08 VDC |
| 1791471999 | 432 Count | 885 Count | 290 Count | 3.91 VDC | 0.08 VDC |
| 1791471095 | 429 Count | 878 Count | 288 Count | 3.92 VDC | 0.08 VDC |
| 1791470191 | 423 Count | 871 Count | 283 Count | 3.92 VDC | 0.08 VDC |
| 1791469287 | 420 Count | 865 Count | 281 Count | 3.92 VDC | 0.08 VDC |
| 1791468383 | 417 Count | 860 Count | 279 Count | 3.92 VDC | 0.08 VDC |
| 1791467479 | 414 Count | 853 Count | 277 Count | 3.92 VDC | 0.08 VDC |
| 1791466575 | 411 Count | 848 Count | 275 Count | 3.91 VDC | 0.08 VDC |
| 1791465670 | 408 Count | 844 Count | 273 Count | 3.91 VDC | 0.08 VDC |
| 1791464766 | 405 Count | 839 Count | 271 Count | 3.91 VDC | 0.08 VDC |
| 1791463862 | 402 Count | 834 Count | 269 Count | 3.91 VDC | 0.08 VDC |
| 1791462958 | 399 Count | 828 Count | 267 Count | 3.91 VDC | 0.08 VDC |
| 1791462054 | 396 Count | 822 Count | 265 Count | 3.91 VDC | 0.08 VDC |
| 1791461150 | 393 Count | 817 Count | 263 Count | 3.91 VDC | 0.08 VDC |
| 1791460246 | 390 Count | 812 Count | 261 Count | 3.9 VDC | 0.08 VDC |
| 1791459340 | 388 Count | 806 Count | 260 Count | 3.91 VDC | 0.08 VDC |
| 1791458436 | 386 Count | 801 Count | 259 Count | 3.92 VDC | 0.08 VDC |
| 1791457531 | 383 Count | 795 Count | 257 Count | 3.92 VDC | 0.08 VDC |
| 1791456627 | 380 Count | 791 Count | 255 Count | 3.91 VDC | 0.08 VDC |
| 1791455723 | 377 Count | 785 Count | 253 Count | 3.91 VDC | 0.08 VDC |
| 1791454819 | 374 Count | 780 Count | 251 Count | 3.92 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)