This is the latest recevied telemetry packets stored in our database for station/object SQ5STR-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1795357357 | 9 Count | 270 Count | 0 Count | 0 VDC | 0 VDC |
| 1795355557 | 8 Count | 250 Count | 0 Count | 0 VDC | 0 VDC |
| 1795353756 | 7 Count | 216 Count | 0 Count | 0 VDC | 0 VDC |
| 1795351955 | 6 Count | 198 Count | 0 Count | 0 VDC | 0 VDC |
| 1795350154 | 5 Count | 173 Count | 0 Count | 0 VDC | 0 VDC |
| 1795348360 | 4 Count | 146 Count | 0 Count | 0 VDC | 0 VDC |
| 1795346559 | 3 Count | 120 Count | 0 Count | 0 VDC | 0 VDC |
| 1795344759 | 2 Count | 87 Count | 0 Count | 0 VDC | 0 VDC |
| 1795342958 | 1 Count | 61 Count | 0 Count | 0 VDC | 0 VDC |
| 1795341157 | 0 Count | 28 Count | 0 Count | 0 VDC | 0 VDC |
| 1795339356 | 35 Count | 1031 Count | 0 Count | 0 VDC | 0 VDC |
| 1795337556 | 34 Count | 988 Count | 0 Count | 0 VDC | 0 VDC |
| 1795335755 | 33 Count | 951 Count | 0 Count | 0 VDC | 0 VDC |
| 1795333954 | 32 Count | 921 Count | 0 Count | 0 VDC | 0 VDC |
| 1795332153 | 31 Count | 890 Count | 0 Count | 0 VDC | 0 VDC |
| 1795330353 | 30 Count | 860 Count | 0 Count | 0 VDC | 0 VDC |
| 1795328552 | 29 Count | 832 Count | 0 Count | 0 VDC | 0 VDC |
| 1795326758 | 28 Count | 802 Count | 0 Count | 0 VDC | 0 VDC |
| 1795324958 | 27 Count | 763 Count | 0 Count | 0 VDC | 0 VDC |
| 1795323157 | 26 Count | 725 Count | 0 Count | 0 VDC | 0 VDC |
| 1795321356 | 25 Count | 689 Count | 0 Count | 0 VDC | 0 VDC |
| 1795319555 | 24 Count | 655 Count | 0 Count | 0 VDC | 0 VDC |
| 1795317755 | 23 Count | 622 Count | 0 Count | 0 VDC | 0 VDC |
| 1795315954 | 22 Count | 588 Count | 0 Count | 0 VDC | 0 VDC |
| 1795314153 | 21 Count | 550 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)