This is the latest recevied telemetry packets stored in our database for station/object HB3YNV-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1787553336 | 4.32 VDC | 0.94 VDC | 0 | 0 | 0 |
| 1787552436 | 4.33 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1787551535 | 4.32 VDC | 0.82 VDC | 0 | 0 | 0 |
| 1787550635 | 4.32 VDC | 0.84 VDC | 0 | 0 | 0 |
| 1787549735 | 4.33 VDC | 0.76 VDC | 0 | 0 | 0 |
| 1787548835 | 4.33 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1787547934 | 4.32 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1787547034 | 4.32 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1787546134 | 4.32 VDC | 0.94 VDC | 0 | 0 | 0 |
| 1787545234 | 4.32 VDC | 0.82 VDC | 0 | 0 | 0 |
| 1787544333 | 4.32 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1787543434 | 4.32 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1787542533 | 4.32 VDC | 0.98 VDC | 0 | 0 | 0 |
| 1787541633 | 4.32 VDC | 0.8 VDC | 0 | 0 | 0 |
| 1787540734 | 4.32 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1787539832 | 4.32 VDC | 0.82 VDC | 0 | 0 | 0 |
| 1787538932 | 4.32 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1787538033 | 4.32 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1787537132 | 4.32 VDC | 0.92 VDC | 0 | 0 | 0 |
| 1787536232 | 4.32 VDC | 0.78 VDC | 0 | 0 | 0 |
| 1787535331 | 4.32 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1787534431 | 4.31 VDC | 0.7 VDC | 0 | 0 | 0 |
| 1787533531 | 4.32 VDC | 0.82 VDC | 0 | 0 | 0 |
| 1787532631 | 4.32 VDC | 0.82 VDC | 0 | 0 | 0 |
| 1787531731 | 4.33 VDC | 0.96 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)