This is the latest recevied telemetry packets stored in our database for station/object SR2LMU-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1787564209 | 8 Count | 78 Count | 5 Count | 4.32 VDC | 5.62 VDC |
| 1787563309 | 6 Count | 60 Count | 4 Count | 4.32 VDC | 5.62 VDC |
| 1787562409 | 3 Count | 41 Count | 2 Count | 4.31 VDC | 5.62 VDC |
| 1787561510 | 2 Count | 23 Count | 2 Count | 4.32 VDC | 5.62 VDC |
| 1787560610 | 100 Count | 1009 Count | 51 Count | 4.36 VDC | 5.46 VDC |
| 1787559711 | 98 Count | 990 Count | 50 Count | 4.3 VDC | 5.6 VDC |
| 1787558811 | 95 Count | 964 Count | 48 Count | 4.3 VDC | 5.6 VDC |
| 1787557911 | 93 Count | 947 Count | 47 Count | 4.3 VDC | 5.6 VDC |
| 1787557011 | 91 Count | 931 Count | 46 Count | 4.31 VDC | 4.48 VDC |
| 1787556111 | 89 Count | 916 Count | 45 Count | 4.3 VDC | 5.6 VDC |
| 1787555212 | 88 Count | 898 Count | 45 Count | 4.3 VDC | 5.6 VDC |
| 1787554312 | 86 Count | 876 Count | 44 Count | 4.3 VDC | 5.6 VDC |
| 1787553413 | 83 Count | 857 Count | 42 Count | 4.3 VDC | 5.6 VDC |
| 1787552512 | 82 Count | 836 Count | 42 Count | 4.3 VDC | 5.6 VDC |
| 1787551612 | 79 Count | 815 Count | 40 Count | 4.3 VDC | 5.6 VDC |
| 1787550712 | 78 Count | 792 Count | 40 Count | 4.31 VDC | 4.48 VDC |
| 1787549812 | 75 Count | 769 Count | 38 Count | 4.3 VDC | 5.6 VDC |
| 1787548913 | 73 Count | 750 Count | 37 Count | 4.31 VDC | 4.48 VDC |
| 1787548014 | 71 Count | 728 Count | 36 Count | 4.3 VDC | 4.5 VDC |
| 1787547113 | 69 Count | 703 Count | 35 Count | 4.3 VDC | 4.5 VDC |
| 1787546214 | 67 Count | 683 Count | 34 Count | 4.3 VDC | 4.52 VDC |
| 1787545315 | 64 Count | 654 Count | 32 Count | 4.3 VDC | 4.52 VDC |
| 1787544414 | 61 Count | 629 Count | 30 Count | 4.3 VDC | 1.18 VDC |
| 1787543514 | 60 Count | 604 Count | 30 Count | 4.3 VDC | 2.34 VDC |
| 1787542615 | 57 Count | 583 Count | 28 Count | 4.3 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)