This is the latest recevied telemetry packets stored in our database for station/object DO6GZ-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Satellite* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791467473 | 4.17 V | 23 | 0 | 0 | 0 |
| 1791467357 | 3.8 V | 20 | 0 | 0 | 0 |
| 1791467241 | 3.59 V | 25 | 0 | 0 | 0 |
| 1791467125 | 4.3 V | 26 | 0 | 0 | 0 |
| 1791467009 | 4 V | 26 | 0 | 0 | 0 |
| 1791466893 | 3.68 V | 25 | 0 | 0 | 0 |
| 1791466662 | 3.99 V | 24 | 0 | 0 | 0 |
| 1791466431 | 3.44 V | 23 | 0 | 0 | 0 |
| 1791466315 | 3.62 V | 21 | 0 | 0 | 0 |
| 1791464466 | 4.14 V | 24 | 0 | 0 | 0 |
| 1791464351 | 3.69 V | 24 | 0 | 0 | 0 |
| 1791464234 | 4.38 V | 21 | 0 | 0 | 0 |
| 1791464119 | 3.41 V | 21 | 0 | 0 | 0 |
| 1791462960 | 3.45 V | 18 | 0 | 0 | 0 |
| 1791462845 | 4.29 V | 21 | 0 | 0 | 0 |
| 1791462729 | 4.22 V | 21 | 0 | 0 | 0 |
| 1791462614 | 4.09 V | 21 | 0 | 0 | 0 |
| 1791462498 | 3.92 V | 19 | 0 | 0 | 0 |
| 1791462382 | 4.18 V | 21 | 0 | 0 | 0 |
| 1791462149 | 3.89 V | 22 | 0 | 0 | 0 |
| 1791462034 | 3.49 V | 18 | 0 | 0 | 0 |
| 1791461918 | 4.25 V | 16 | 0 | 0 | 0 |
| 1791461205 | 3.77 V | 15 | 0 | 0 | 0 |
| 1791461089 | 3.92 V | 14 | 0 | 0 | 0 |
| 1791460858 | 4.04 V | 10 | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.01, 0.01
Satellite: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)