This is the latest recevied telemetry packets stored in our database for station/object F5LHI-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1775492726 | 2.53 VDC | 0 | 0 | 0 | 0 |
| 1775490926 | 2.51 VDC | 0 | 0 | 0 | 0 |
| 1775489126 | 2.45 VDC | 0 | 0 | 0 | 0 |
| 1775487326 | 2.4 VDC | 0 | 0 | 0 | 0 |
| 1775485525 | 2.37 VDC | 0 | 0 | 0 | 0 |
| 1775483725 | 2.43 VDC | 0 | 0 | 0 | 0 |
| 1775481925 | 2.33 VDC | 0 | 0 | 0 | 0 |
| 1775480125 | 2.41 VDC | 0 | 0 | 0 | 0 |
| 1775478324 | 2.34 VDC | 0 | 0 | 0 | 0 |
| 1775476524 | 2.34 VDC | 0 | 0 | 0 | 0 |
| 1775474724 | 2.44 VDC | 0 | 0 | 0 | 0 |
| 1775472924 | 2.33 VDC | 0 | 0 | 0 | 0 |
| 1775471123 | 2.32 VDC | 0 | 0 | 0 | 0 |
| 1775469323 | 2.33 VDC | 0 | 0 | 0 | 0 |
| 1775467523 | 2.2 VDC | 0 | 0 | 0 | 0 |
| 1775465723 | 2.35 VDC | 0 | 0 | 0 | 0 |
| 1775463923 | 2.18 VDC | 0 | 0 | 0 | 0 |
| 1775462122 | 2.23 VDC | 0 | 0 | 0 | 0 |
| 1775460322 | 2.03 VDC | 0 | 0 | 0 | 0 |
| 1775458522 | 2.21 VDC | 0 | 0 | 0 | 0 |
| 1775456722 | 2.15 VDC | 0 | 0 | 0 | 0 |
| 1775454921 | 2.12 VDC | 0 | 0 | 0 | 0 |
| 1775453121 | 2.2 VDC | 0 | 0 | 0 | 0 |
| 1775451320 | 2.17 VDC | 0 | 0 | 0 | 0 |
| 1775449520 | 2.15 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)