This is the latest recevied telemetry packets stored in our database for station/object YO3JAZ-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1775495392 | 3.3 VDC | 26.7 C | 1022.63 hPa | 0 | 0 |
| 1775495377 | 3.3 VDC | 26.7 C | 1023.63 hPa | 0 | 0 |
| 1775495357 | 3.3 VDC | 26.7 C | 1021.88 hPa | 0 | 0 |
| 1775495247 | 3.31 VDC | 26.6 C | 1021.88 hPa | 0 | 0 |
| 1775495217 | 3.31 VDC | 26.6 C | 1019.38 hPa | 0 | 0 |
| 1775495202 | 3.32 VDC | 26.6 C | 1017.13 hPa | 0 | 0 |
| 1775495164 | 3.32 VDC | 26.6 C | 1012.88 hPa | 0 | 0 |
| 1775495149 | 3.32 VDC | 26.6 C | 1012.25 hPa | 0 | 0 |
| 1775495128 | 3.32 VDC | 26.6 C | 1010.5 hPa | 0 | 0 |
| 1775495036 | 3.32 VDC | 26.5 C | 1018 hPa | 0 | 0 |
| 1775495004 | 3.33 VDC | 26.5 C | 1020.13 hPa | 0 | 0 |
| 1775494920 | 3.33 VDC | 26.5 C | 1021.25 hPa | 0 | 0 |
| 1775494905 | 3.33 VDC | 26.5 C | 1019.63 hPa | 0 | 0 |
| 1775494877 | 3.33 VDC | 26.5 C | 1018.38 hPa | 0 | 0 |
| 1775494773 | 3.34 VDC | 26.4 C | 1020.38 hPa | 0 | 0 |
| 1775494739 | 3.34 VDC | 26.5 C | 1016.63 hPa | 0 | 0 |
| 1775494714 | 3.34 VDC | 26.5 C | 1016.88 hPa | 0 | 0 |
| 1775493919 | 3.36 VDC | 26.5 C | 1015 hPa | 0 | 0 |
| 1775493016 | 3.38 VDC | 26.6 C | 1019.38 hPa | 0 | 0 |
| 1775492113 | 3.39 VDC | 26.6 C | 1016.25 hPa | 0 | 0 |
| 1775491210 | 3.4 VDC | 26.5 C | 1016.75 hPa | 0 | 0 |
| 1775490307 | 3.41 VDC | 26.1 C | 1015.38 hPa | 0 | 0 |
| 1775489404 | 3.41 VDC | 25.3 C | 1018.25 hPa | 0 | 0 |
| 1775489281 | 3.41 VDC | 25.2 C | 1016.63 hPa | 0 | 0 |
| 1775489266 | 3.41 VDC | 25.2 C | 1016.5 hPa | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)