EA2RCF LoRa APRS MAP Backup

My position About Go to MAIN map Powered by EA2RCF Radioclub Foronda ☰

reset

SR2SAT-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR2SAT-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	TX*	RX*	Digi*
1754226588	89 Count	361 Count	55 Count
1754224787	87 Count	357 Count	54 Count
1754222986	85 Count	350 Count	53 Count
1754221186	83 Count	344 Count	52 Count
1754219385	80 Count	335 Count	50 Count
1754217585	78 Count	328 Count	49 Count
1754215784	76 Count	319 Count	48 Count
1754213983	62 Count	295 Count	35 Count
1754212183	52 Count	277 Count	26 Count
1754210382	49 Count	266 Count	24 Count
1754208588	43 Count	255 Count	23 Count
1754206787	41 Count	245 Count	22 Count
1754204987	39 Count	234 Count	21 Count
1754199585	32 Count	217 Count	17 Count
1754197784	30 Count	203 Count	16 Count
1754195984	28 Count	186 Count	15 Count
1754194183	26 Count	173 Count	14 Count
1754190582	21 Count	145 Count	11 Count
1754188781	19 Count	133 Count	10 Count
1754186987	13 Count	121 Count	9 Count
1754183386	5 Count	39 Count	3 Count
1754181585	3 Count	23 Count	2 Count
1754179785	1 Count	12 Count	1 Count
1754177984	277 Count	1003 Count	165 Count
1754176183	275 Count	986 Count	164 Count

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)