This is the latest recevied telemetry packets stored in our database for station/object TA4HJ-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Bat* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1771582676 | 0 VDC | 4.82 VDC | 0 | 0 | 0 |
| 1771581773 | 0 VDC | 4.84 VDC | 0 | 0 | 0 |
| 1771580870 | 0 VDC | 4.8 VDC | 0 | 0 | 0 |
| 1771579966 | 0 VDC | 4.84 VDC | 0 | 0 | 0 |
| 1771579063 | 0 VDC | 4.88 VDC | 0 | 0 | 0 |
| 1771578160 | 0 VDC | 4.8 VDC | 0 | 0 | 0 |
| 1771577257 | 0 VDC | 4.82 VDC | 0 | 0 | 0 |
| 1771576353 | 0 VDC | 4.84 VDC | 0 | 0 | 0 |
| 1771575450 | 0 VDC | 4.84 VDC | 0 | 0 | 0 |
| 1771574547 | 0 VDC | 4.82 VDC | 0 | 0 | 0 |
| 1771573644 | 0 VDC | 4.8 VDC | 0 | 0 | 0 |
| 1771572740 | 0 VDC | 4.9 VDC | 0 | 0 | 0 |
| 1771571837 | 0 VDC | 4.86 VDC | 0 | 0 | 0 |
| 1771570934 | 0 VDC | 4.78 VDC | 0 | 0 | 0 |
| 1771570030 | 0 VDC | 4.86 VDC | 0 | 0 | 0 |
| 1771569127 | 0 VDC | 4.84 VDC | 0 | 0 | 0 |
| 1771568224 | 0 VDC | 4.9 VDC | 0 | 0 | 0 |
| 1771567321 | 0 VDC | 4.9 VDC | 0 | 0 | 0 |
| 1771566417 | 0 VDC | 4.82 VDC | 0 | 0 | 0 |
| 1771565514 | 0 VDC | 4.84 VDC | 0 | 0 | 0 |
| 1771564611 | 0 VDC | 4.86 VDC | 0 | 0 | 0 |
| 1771563708 | 0 VDC | 4.82 VDC | 0 | 0 | 0 |
| 1771562804 | 0 VDC | 4.9 VDC | 0 | 0 | 0 |
| 1771561901 | 0 VDC | 4.9 VDC | 0 | 0 | 0 |
| 1771560998 | 0 VDC | 4.86 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)