This is the latest recevied telemetry packets stored in our database for station/object IQ5VK-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Ext* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762808492 | 12.4 VDC | 0 | 0 | 0 | 0 |
| 1762807584 | 12.36 VDC | 0 | 0 | 0 | 0 |
| 1762806677 | 12.32 VDC | 0 | 0 | 0 | 0 |
| 1762805770 | 12.44 VDC | 0 | 0 | 0 | 0 |
| 1762804863 | 12.32 VDC | 0 | 0 | 0 | 0 |
| 1762803956 | 12.32 VDC | 0 | 0 | 0 | 0 |
| 1762803049 | 12.5 VDC | 0 | 0 | 0 | 0 |
| 1762802141 | 12.42 VDC | 0 | 0 | 0 | 0 |
| 1762801234 | 12.44 VDC | 0 | 0 | 0 | 0 |
| 1762800328 | 12.5 VDC | 0 | 0 | 0 | 0 |
| 1762799460 | 12.7 VDC | 0 | 0 | 0 | 0 |
| 1762798560 | 12.66 VDC | 0 | 0 | 0 | 0 |
| 1762797660 | 12.86 VDC | 0 | 0 | 0 | 0 |
| 1762796760 | 12.8 VDC | 0 | 0 | 0 | 0 |
| 1762795860 | 12.84 VDC | 0 | 0 | 0 | 0 |
| 1762794960 | 12.94 VDC | 0 | 0 | 0 | 0 |
| 1762794059 | 12.88 VDC | 0 | 0 | 0 | 0 |
| 1762793159 | 12.9 VDC | 0 | 0 | 0 | 0 |
| 1762792259 | 13.06 VDC | 0 | 0 | 0 | 0 |
| 1762791358 | 13.02 VDC | 0 | 0 | 0 | 0 |
| 1762790458 | 13.12 VDC | 0 | 0 | 0 | 0 |
| 1762789558 | 13.18 VDC | 0 | 0 | 0 | 0 |
| 1762788658 | 13.3 VDC | 0 | 0 | 0 | 0 |
| 1762787758 | 13.4 VDC | 0 | 0 | 0 | 0 |
| 1762786858 | 13.38 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Ext: 0, 0.02, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)