This is the latest recevied telemetry packets stored in our database for station/object DF1IAN-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Atm_Press* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791458027 | 18.7 | 1006.5 | 0 | 0 | 0 |
| 1791455584 | 18.5 | 1014 | 0 | 0 | 0 |
| 1791450856 | 18.5 | 1016.63 | 0 | 0 | 0 |
| 1791443919 | 18.5 | 1009.63 | 0 | 0 | 0 |
| 1791442602 | 18.5 | 1019.13 | 0 | 0 | 0 |
| 1791440988 | 18.5 | 1007.38 | 0 | 0 | 0 |
| 1791435971 | 18.9 | 1010 | 0 | 0 | 0 |
| 1791428920 | 19.4 | 1007.75 | 0 | 0 | 0 |
| 1791426362 | 19.6 | 1005.75 | 0 | 0 | 0 |
| 1791422743 | 20.1 | 1009.63 | 0 | 0 | 0 |
| 1791402128 | 22.7 | 1008.63 | 0 | 0 | 0 |
| 1791399253 | 23.1 | 1015 | 0 | 0 | 0 |
| 1791396925 | 23.5 | 1009.25 | 0 | 0 | 0 |
| 1791394020 | 23.9 | 1009.88 | 0 | 0 | 0 |
| 1791387108 | 24 | 1010.38 | 0 | 0 | 0 |
| 1791382388 | 23.6 | 1015.13 | 0 | 0 | 0 |
| 1791379648 | 23.2 | 1009.38 | 0 | 0 | 0 |
| 1791378026 | 22.9 | 1012.25 | 0 | 0 | 0 |
| 1791375985 | 22.3 | 1012.25 | 0 | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Atm_Press: 0, 0.125, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)