This is the latest recevied telemetry packets stored in our database for station/object SQ2CPA-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1750154941 | 11 Count | 158 Count | 0 Count | 3.96 VDC | 4.1 VDC |
| 1750153141 | 10 Count | 144 Count | 0 Count | 3.96 VDC | 4.1 VDC |
| 1750151341 | 9 Count | 128 Count | 0 Count | 3.96 VDC | 4.1 VDC |
| 1750149542 | 8 Count | 118 Count | 0 Count | 3.96 VDC | 4.1 VDC |
| 1750147743 | 7 Count | 105 Count | 0 Count | 3.96 VDC | 4.1 VDC |
| 1750145945 | 6 Count | 92 Count | 0 Count | 3.96 VDC | 4.1 VDC |
| 1750144145 | 5 Count | 79 Count | 0 Count | 3.96 VDC | 4.1 VDC |
| 1750140548 | 3 Count | 52 Count | 0 Count | 3.96 VDC | 4.1 VDC |
| 1750138749 | 2 Count | 39 Count | 0 Count | 3.96 VDC | 4.1 VDC |
| 1750136949 | 1 Count | 25 Count | 0 Count | 3.96 VDC | 4.1 VDC |
| 1750135151 | 0 Count | 12 Count | 0 Count | 3.96 VDC | 4.1 VDC |
| 1750133351 | 76 Count | 1008 Count | 0 Count | 3.96 VDC | 3.42 VDC |
| 1750131551 | 75 Count | 996 Count | 0 Count | 3.96 VDC | 4.12 VDC |
| 1750129752 | 74 Count | 985 Count | 0 Count | 3.96 VDC | 1.74 VDC |
| 1750127951 | 73 Count | 973 Count | 0 Count | 3.96 VDC | 0.12 VDC |
| 1750126152 | 72 Count | 960 Count | 0 Count | 3.96 VDC | 0.12 VDC |
| 1750124353 | 71 Count | 947 Count | 0 Count | 3.96 VDC | 0.12 VDC |
| 1750122553 | 70 Count | 933 Count | 0 Count | 3.96 VDC | 0.12 VDC |
| 1750120754 | 69 Count | 923 Count | 0 Count | 3.96 VDC | 0.12 VDC |
| 1750118954 | 68 Count | 916 Count | 0 Count | 3.96 VDC | 0.12 VDC |
| 1750117155 | 67 Count | 905 Count | 0 Count | 3.96 VDC | 0.12 VDC |
| 1750115355 | 66 Count | 892 Count | 0 Count | 3.96 VDC | 0.12 VDC |
| 1750113556 | 65 Count | 876 Count | 0 Count | 3.96 VDC | 0.12 VDC |
| 1750111756 | 64 Count | 863 Count | 0 Count | 3.96 VDC | 0.12 VDC |
| 1750109957 | 63 Count | 850 Count | 0 Count | 3.96 VDC | 0.12 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)