This is the latest recevied telemetry packets stored in our database for station/object DG1FI-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1775470046 | 4.19 VDC | 20 C | 1027.38 hPa | 0 | 0 |
| 1775469142 | 4.19 VDC | 19.3 C | 1027.13 hPa | 0 | 0 |
| 1775468239 | 4.19 VDC | 19.5 C | 1024.88 hPa | 0 | 0 |
| 1775467335 | 4.16 VDC | 19.5 C | 1027.63 hPa | 0 | 0 |
| 1775466431 | 4.08 VDC | 20.5 C | 1027 hPa | 0 | 0 |
| 1775465528 | 4.01 VDC | 19.2 C | 1027.25 hPa | 0 | 0 |
| 1775464624 | 3.94 VDC | 19.5 C | 1027.25 hPa | 0 | 0 |
| 1775463720 | 3.85 VDC | 19.8 C | 1027.25 hPa | 0 | 0 |
| 1775462817 | 3.63 VDC | 21.3 C | 1027.5 hPa | 0 | 0 |
| 1775461913 | 3.63 VDC | 21.6 C | 1027.25 hPa | 0 | 0 |
| 1775461010 | 3.64 VDC | 21.5 C | 1027.13 hPa | 0 | 0 |
| 1775460106 | 3.64 VDC | 21.6 C | 1026.75 hPa | 0 | 0 |
| 1775459203 | 3.66 VDC | 21.4 C | 1027.13 hPa | 0 | 0 |
| 1775458299 | 3.67 VDC | 21.3 C | 1026 hPa | 0 | 0 |
| 1775457396 | 3.68 VDC | 21.3 C | 1026.75 hPa | 0 | 0 |
| 1775456492 | 3.69 VDC | 21.3 C | 1025.88 hPa | 0 | 0 |
| 1775455590 | 3.69 VDC | 21.2 C | 1027.25 hPa | 0 | 0 |
| 1775454685 | 3.7 VDC | 21.3 C | 1026 hPa | 0 | 0 |
| 1775453782 | 3.71 VDC | 21.2 C | 1026.38 hPa | 0 | 0 |
| 1775452878 | 3.72 VDC | 21.1 C | 1025.88 hPa | 0 | 0 |
| 1775451975 | 3.73 VDC | 21.4 C | 1026 hPa | 0 | 0 |
| 1775451071 | 3.74 VDC | 21.6 C | 1025.25 hPa | 0 | 0 |
| 1775450167 | 3.75 VDC | 21.6 C | 1025.88 hPa | 0 | 0 |
| 1775449263 | 3.76 VDC | 21.6 C | 1025.25 hPa | 0 | 0 |
| 1775448360 | 3.77 VDC | 21.5 C | 1026.13 hPa | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)