This is the latest recevied telemetry packets stored in our database for station/object LZ1PRO-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790186094 | 4.02 VDC | 0 | 0 | 0 | 0 |
| 1790185194 | 4.04 VDC | 0 | 0 | 0 | 0 |
| 1790184294 | 4.04 VDC | 0 | 0 | 0 | 0 |
| 1790183394 | 4.03 VDC | 0 | 0 | 0 | 0 |
| 1790182493 | 4.03 VDC | 0 | 0 | 0 | 0 |
| 1790181593 | 4.04 VDC | 0 | 0 | 0 | 0 |
| 1790180693 | 4.03 VDC | 0 | 0 | 0 | 0 |
| 1790179793 | 4.05 VDC | 0 | 0 | 0 | 0 |
| 1790178893 | 4.04 VDC | 0 | 0 | 0 | 0 |
| 1790177992 | 4.03 VDC | 0 | 0 | 0 | 0 |
| 1790177092 | 4.04 VDC | 0 | 0 | 0 | 0 |
| 1790176192 | 4.04 VDC | 0 | 0 | 0 | 0 |
| 1790175292 | 4.04 VDC | 0 | 0 | 0 | 0 |
| 1790174391 | 4.04 VDC | 0 | 0 | 0 | 0 |
| 1790173491 | 4.05 VDC | 0 | 0 | 0 | 0 |
| 1790172591 | 4.04 VDC | 0 | 0 | 0 | 0 |
| 1790171691 | 4.04 VDC | 0 | 0 | 0 | 0 |
| 1790170790 | 4.05 VDC | 0 | 0 | 0 | 0 |
| 1790169890 | 4.05 VDC | 0 | 0 | 0 | 0 |
| 1790168990 | 4.04 VDC | 0 | 0 | 0 | 0 |
| 1790168090 | 4.05 VDC | 0 | 0 | 0 | 0 |
| 1790167189 | 4.03 VDC | 0 | 0 | 0 | 0 |
| 1790166289 | 4.03 VDC | 0 | 0 | 0 | 0 |
| 1790165388 | 4.03 VDC | 0 | 0 | 0 | 0 |
| 1790164487 | 4.04 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)