This is the latest recevied telemetry packets stored in our database for station/object SQ2CPA-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1779395102 | 192 Count | 422 Count | 173 Count | 4.06 VDC | 0 VDC |
| 1779393304 | 185 Count | 403 Count | 167 Count | 4.06 VDC | 0 VDC |
| 1779391505 | 174 Count | 380 Count | 157 Count | 4.06 VDC | 0 VDC |
| 1779389708 | 167 Count | 362 Count | 151 Count | 4.07 VDC | 1.4 VDC |
| 1779387910 | 158 Count | 336 Count | 143 Count | 4.07 VDC | 5.52 VDC |
| 1779386112 | 118 Count | 279 Count | 104 Count | 4.08 VDC | 5.54 VDC |
| 1779384314 | 114 Count | 265 Count | 101 Count | 4.08 VDC | 5.54 VDC |
| 1779382516 | 108 Count | 249 Count | 96 Count | 4.08 VDC | 5.56 VDC |
| 1779380718 | 103 Count | 235 Count | 92 Count | 4.08 VDC | 5.54 VDC |
| 1779378920 | 98 Count | 221 Count | 88 Count | 4.08 VDC | 5.54 VDC |
| 1779377122 | 93 Count | 209 Count | 84 Count | 4.08 VDC | 5.56 VDC |
| 1779375323 | 88 Count | 190 Count | 80 Count | 4.09 VDC | 5.56 VDC |
| 1779373525 | 81 Count | 169 Count | 74 Count | 4.09 VDC | 5.54 VDC |
| 1779371726 | 74 Count | 149 Count | 68 Count | 4.1 VDC | 5.56 VDC |
| 1779369928 | 67 Count | 125 Count | 62 Count | 4.1 VDC | 5.56 VDC |
| 1779368130 | 60 Count | 109 Count | 56 Count | 4.1 VDC | 5.56 VDC |
| 1779366332 | 54 Count | 97 Count | 51 Count | 4.1 VDC | 5.56 VDC |
| 1779364533 | 47 Count | 78 Count | 45 Count | 4.1 VDC | 5.56 VDC |
| 1779362735 | 26 Count | 45 Count | 25 Count | 4.11 VDC | 5.56 VDC |
| 1779360936 | 20 Count | 35 Count | 20 Count | 4.11 VDC | 5.56 VDC |
| 1779359139 | 302 Count | 1008 Count | 246 Count | 4.11 VDC | 5.56 VDC |
| 1779357340 | 291 Count | 969 Count | 236 Count | 4.11 VDC | 5.54 VDC |
| 1779355541 | 284 Count | 951 Count | 230 Count | 4.12 VDC | 5.54 VDC |
| 1779353742 | 276 Count | 930 Count | 223 Count | 4.12 VDC | 5.54 VDC |
| 1779351944 | 270 Count | 913 Count | 218 Count | 4.13 VDC | 5.56 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)